All elements except C3D27R and
C3D27RH yield exact solutions. These
elements use a special 14-point reduced-integration scheme since Gaussian 2 × 2 × 2
integration leaves too many kinematic nodes. The stiffness matrix is not integrated
exactly with the employed integration rule, leading to small discrepancies in the
results. The wedge elements and the quadratic reduced-integration brick elements
pass only a restricted patch test; that is, such elements with midside nodes on any
edges will pass the patch test only if those edges are straight.
Section output requests to the results (.fil) file and to the
data (.dat) file are used in the input files with
C3D8H,
C3D10MH, and
C3D27RH elements to output accumulated
quantities in different sections through the model.