Products
Abaqus/Standard
Abaqus/Explicit
Abaqus/CAE
Type
Model data
LevelPartPart instance
Abaqus/CAE
Property module
There are no parameters associated with this option.
Data line when used with cohesive sections and shell
sections
- First (and only) line
-
Value of the shear stiffness of the section in the first
direction,
.
Value of the shear stiffness of the section in the second
direction,
.
Value of the coupling term in the shear stiffness of the
section,
.
Value of the slenderness compensation factor. The default
is 0.25.
If either value
or
is omitted or given as zero, the nonzero value is used
for both.
Data line when used with
BEAM GENERAL SECTION,
SECTION=MESHED
- First (and only) line
-
Value of the shear stiffness of the section in the second
direction,
.
Value of the shear stiffness of the section in the first
direction,
.
Value of the coupling term in the shear stiffness of the
section,
.
Value of the slenderness compensation factor. If this field
is left blank, a default value of 0.25 is
assumed.
If either value
or
is omitted or given as zero, the nonzero value is used
for both.
Data line when used with all other beam sections
- First (and only) line
-
Value of the
shear stiffness of the section.
Value of the
shear stiffness of the section.
Value of the slenderness compensation factor or the label
SCF. If this field is left
blank, a default value of 0.25 is assumed. If the label
SCF is specified, the
values of the shear stiffness specified by the user will be
ignored. They and the slenderness compensation factor will be
calculated from the elastic material definition with the beam
section.
If either value
is omitted or given as zero, the nonzero value will be
used for both when the label SCF is not
used.