*PARTICLE SWELLING

Specify swelling for discrete particles.

This option is used to define swelling properties for discrete particles in Abaqus/Explicit.

This page discusses:

See Also
In Other Guides
Discrete Element Method

Products Abaqus/Explicit

Type Model data

LevelModel

Required parameters

DEFINITION

Set DEFINITION=VOLUMETRIC to indicate that the swelling is based on the volume change ratio.

Set DEFINITION=RADIAL to indicate that the swelling is based on the radius change ratio.

Optional parameters

DEPENDENCIES
Set this parameter equal to the number of field variables, in addition to temperature, on which the swelling definition parameter depends.

Data lines to define the volume change ratio (DEFINITION=VOLUMETRIC)

First line
  1. Volume change ratio,

    v ′ .

  2. Temperature.

  3. First field variable.

  4. Etc., up to six field variables per line.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the volume change ratio as a function of temperature and other predefined field variables.

Data lines to define the radius change ratio (DEFINITION=RADIAL)

First line
  1. Radius change ratio,

    r ′ .

  2. Temperature.

  3. First field variable.

  4. Etc., up to six field variables per line.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the radius change ratio as a function of temperature and other predefined field variables.