*PARTICLE SURFACE DEPOSITION

Specify surface deposition properties for discrete particles.

This option is used to define surface deposition properties for discrete particles in Abaqus/Explicit.

This page discusses:

See Also
In Other Guides
Discrete Element Method

Products Abaqus/Explicit

Type Model data

LevelModel

Required parameters

DEFINITION

Set DEFINITION=RATIO to indicate that the surface deposition is based on the deposition thickness ratio.

Set DEFINITION=THICKNESS to indicate that the surface deposition is based on the deposition thickness.

Optional parameters

DEPENDENCIES
Set this parameter equal to the number of field variables, in addition to temperature, on which the surface deposition parameter depends.

Data lines to define the ratio of the thickness of the deposited material to the original radius (DEFINITION=RATIO)

First line
  1. S D s u r f .

  2. Temperature.

  3. First field variable.

  4. Etc., up to six field variables per line.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the surface deposition thickness ratio as a function of temperature and other predefined field variables.

Data lines to define the thickness of the deposited material (DEFINITION=THICKNESS)

First line
  1. Δ r .

  2. Temperature.

  3. First field variable.

  4. Etc., up to six field variables per line.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the surface deposition thickness as a function of temperature and other predefined field variables.