*ELEMENT RECOVERY MATRIX

Generate modal recovery matrices for a substructure.

This option is used to generate substructure recovery matrices for the element output variables within a substructure. These matrices can be used to recover results within the substructure from a solution given at all substructure degrees of freedom (generalized displacements) including the retained nodal degrees of freedom and the generalized coordinates corresponding to the substructure dynamic modes.

This option can be used only with a substructure generation analysis in Abaqus/Standard (SUBSTRUCTURE GENERATE option).

This page discusses:

See Also
*SUBSTRUCTURE GENERATE
In Other Guides
Generating Substructures

Products Abaqus/Standard

Type History data

LevelStep

Optional parameters

POSITION

Set POSITION=AVERAGED AT NODES if values specified for recovery are the averages of values extrapolated to the nodes of the elements in the set. Averaging occurs only over elements that contribute to a node that have the same element type and properties.

Set POSITION=CENTROIDAL if values are being recovered at the centroid of the elements (the centroid of the reference surface of a shell element, the midpoint between the end nodes of a beam element).

Set POSITION=INTEGRATION POINTS (default) if values are being recovered at the integration points at which the variables are actually calculated.

Set POSITION=NODES if the values being recovered are extrapolated to the nodes of each element in the set but not averaged at the nodes.

ELSET
Set this parameter equal to the name of the element set for which the element results recovery should be enabled. If this parameter is omitted, the recovery matrices are generated for all elements in the model.

The ELSET and EXTERIOR parameters are mutually exclusive. If both parameters are omitted, Abaqus/Standard generates element recovery matrices for all the elements in the model.

EXTERIOR
Include this parameter to restrict element recovery matrix generation to only the exterior three-dimensional elements.

The EXTERIOR and ELSET parameters are mutually exclusive. If both parameters are omitted, Abaqus/Standard generates element recovery matrices for all the elements in the model.

Data lines to request recovery matrix generation

First line (optional)
  1. Specify a list of the section points in the shell, beam, or layered solid at which variables should be recovered. If this data line is omitted, the variables are recovered at the default output points. You can specify a maximum number of 16 section points.

Second line
  1. Specify the identifying keys for the output variables to be available for recovery within a substructure. The keys are defined in Abaqus/Standard Output Variable Identifiers and Abaqus/Explicit Output Variable Identifiers. Output variables E and S are supported.

Repeat the second data line as often as necessary to define the list of variables to be output to the output database.