-
From the main menu bar, select .
Abaqus/CAE displays the step control Manager. The manager shows the
list of step controls created in the current step.
-
From the list of step control in the manager, select the one which you want to
modify.
-
From the buttons available on the Step Control Manager,
click Edit.
Abaqus/CAE displays the Edit Step Control editor. Information
at the top of the editor indicates the following:
-
The name of the step control.
-
The name of the step in which step control is created.
-
The analysis procedure associated with the step.
-
Select the appropriate action from the Action drop-down
menu. The default value is Continue.
-
Select the appropriate refinement criteria from the DT
Refinement drop-down menu. The default value is
Yes.
-
Enter the appropriate value for the tolerance in the
Tolerance text field. The default value is 0.001.
-
Fill the required data in the table. Only the column of the required field will
be editable, other column will appear as a grayout or non-editable. The
editability of the column is automatically set based on the selected action and
refinement criteria.
-
In the first column named Sensor, select the
appropriate sensor history output which is going to be used as a
sensor.
-
In the second column named Threshold Criteria,
select the appropriate sensor threshold criteria from the drop-down
menu.
-
In the third column named Threshold Value, enter
the appropriate sensor threshold value.
-
In the forth column named Time Increment, enter
the time increment value to be used, provided that it is lower than
the time increment computed by the automatic time-incrementation
algorithms in Abaqus/Standard and the condition for time increment refinement is met.
-
In the fifth column named Sensor Limit Start,
enter the sensor limit value when the time increment refinement
starts.
-
In the last column named Sensor Limit End, enter
the sensor limit value when the time increment refinement ends.
-
When you have finished defining the step control, click
OK to save your changes.
|