View cut along a path

View Cut Along a Path plug-in is used to move a cut plane through the model along a user defied point-list or node-list path. You can access the plug-in only from the the Visualization module.

  1. From the main menu bar in the the Visualization module, select Plug-ins View Cut Along a Path .

    The View Cut Along a Path dialog box appears.

  2. Select a path from the Choose Path: combo box.

    Tip: Click the path icon to create a new path.

  3. Toggle on Display free body forces from Options to view free body forces at the point on the path as cut plane moves along.
  4. Slide the Move along a path slider to move the cut plane along the path from Start to End of the path.

    The cut plane is positioned so that the point on the path corresponding to the slider movement lies on the cut plane and the tangent to the spline fitted through the path points is normal to the plane.

  5. Slide the Axis-2 and Axis-3 sliders to rotate the cut plane along orthogonal axes at the given position on the path from -90 to 90 degrees.

    The orthogonal axes Axis-2 and Axis-3 are Normal and Bi-normal of the Frenet–Serret frame at the given point of the spline fitted through the path points.

  6. Click Reset Rotations to reset Axis-2 and Axis-3 rotations to zero.
  7. Click OK to close the View Cut Along a Path dialog box retaining current view cut.
  8. Click Cancel to close the View Cut Along a Path dialog box.