Specifying gap diffusivity for electrical contact property options

You can specify gap diffusivity between closely adjacent or contacting surfaces. The diffusivity is proportional to the distance across the interface up to a cutoff gap distance directly beyond which no ionic or species flux occurs. The diffusivity is a function of the clearance (separation) between the surfaces and a function of the contact pressure, ion concentration, or species concentration. For more information, see Electrical Contact Properties.

  1. From the main menu bar, select Interaction Property Create .
  2. In the Create Interaction Property dialog box that appears, do the following:
    1. Name the interaction property.

      For more information about naming objects, see Using basic dialog box components.

    2. Select the Contact type of interaction property.
  3. Click Continue to close the Create Interaction Property dialog box.
  4. From the menu bar in the contact property editor, select Electrical Diffusivity .
  5. In the Edit Contact Property dialog box that appears, indicate if you want to define diffusivity as a function of Ion Concentration or Species Concentration.
  6. Specify the Cut Off Flow Across: Enter a value for the cutoff clearance distance above which no ion or species diffusion occurs across a contact interface.
  7. If you want to define diffusivity as a function of Ion Concentration, display the Concentration Dependency tabbed page, and do the following:
    1. Toggle on Use temperature-dependent data if the data are dependent on temperature.
    2. Click the arrows to the right of the Number of field variables field to specify the number of field variables on which the data depend.
    3. In the data table, define diffusivity as a function of contact diffusivity and contact pressure and ion concentration.

      The tabular data must contain at least two pairs of points.

  8. If you want to define diffusivity as a function of Species Concentration, display the Concentration Dependency tabbed page, and do the following:
    1. Toggle on Use temperature-dependent data if the data are dependent on temperature.
    2. Click the arrows to the right of the Number of field variables field to specify the number of field variables on which the data depend.
    3. In the data table, define diffusivity as a function of contact diffusivity and contact pressure and species concentration.

      The tabular data must contain at least two pairs of points.

  9. Click OK to create the contact property and to exit the Edit Contact Property dialog box. Alternatively, you can select another contact property option to define from the menus in the Edit Contact Property dialog box.