-
From the main menu bar, select .
-
In the Create Interaction dialog box that appears, do the
following:
-
Name the interaction.
For more information about naming objects, see Using basic dialog box components.
-
Select the step. You can define convection from a surface only during a
heat transfer, coupled temperature-displacement, coupled
thermal-electrical, coupled thermal-electrochemical, coupled
thermal-electrochemical structure, or coupled thermal-electrochemical
structure pore pressure step.
-
Select the Surface film condition type of
interaction.
-
Click Continue to close the Create
Interaction dialog box.
-
Use one of the following methods to select the surface:
You can use the angle method to select a group of faces or edges from geometry
or a group of element faces from a mesh. For more information, see Using the angle and feature edge method to select multiple objects.
-
In the Edit Interaction dialog box that appears, click the
arrow to the right of the Definition field, and select an
option from the list that appears:
- Select Embedded Coefficient to specify the film
coefficient in this dialog box.
- Select Property Reference to define the film
coefficient as a function of temperature and field variables using a film
condition interaction property.
- Select User-defined to define nonuniform film
coefficients in user subroutine FILM. (This option
is valid only in Abaqus/Standard analyses). See the following sections for more information:
- Select an analytical field to define a spatially varying film
coefficient. The analytical field does not affect the sink temperature. Only
analytical fields that are valid for this interaction type are displayed in
the selection list. Alternatively, you can click
to create a new
analytical field. (See The Analytical Field toolset for more
information.)
-
If you selected the Embedded Coefficient or analytical
field definition option, perform the following steps:
-
In the Film coefficient field, enter the film
coefficient, h.
-
If you want to vary the film coefficient with time, click the arrow to
the right of the Film coefficient amplitude field
and select an amplitude from the list that appears. If desired, click
to create a new
amplitude; see Selecting an amplitude type to define for more
information.
-
In the Sink temperature field, enter the sink
temperature,
.
-
If you want to define a spatially varying sink temperature, click the
arrow to the right of the Sink definition field and
select an analytical field, labeled with an (A), or a discrete field,
labeled with a (D). Only analytical fields and discrete fields that are
valid for temperature are available in the selection list. See The Analytical Field toolset and The Discrete Field toolset for more information.
Alternatively, you can click
to create a new
discrete field.
-
If you want to vary the sink temperature with time, click the arrow to
the right of the Sink amplitude field and select an
amplitude from the list that appears. If desired, click
to create a new
amplitude; see Selecting an amplitude type to define for more
information.
-
If you selected the Property Reference definition option,
perform the following steps:
-
Select a film interaction property. If desired, click
to create the
interaction property; see Defining a film condition interaction property for more
information.
-
In the Sink temperature field, enter the sink
temperature,
.
-
If you want to define a spatially varying sink temperature, click the
arrow to the right of the Sink definition field and
select an analytical field, labeled with an (A), or a discrete field,
labeled with a (D). Only analytical fields and discrete fields that are
valid for temperature are available in the selection list. See The Analytical Field toolset and The Discrete Field toolset for more information.
Alternatively, you can click
to create a new
discrete field.
-
If you want to vary the sink temperature with time, click the arrow to
the right of the Sink amplitude field and select an
amplitude from the list that appears. If desired, click
to create a new
amplitude; see Selecting an amplitude type to define for more
information.
-
If you selected the User-defined definition option,
perform the following steps:
-
In the Film coefficient field, enter the film
coefficient, h.
-
In the Sink temperature field, enter the sink
temperature,
.
-
Enter the Job module, and display the job editor for the analysis job of interest. (For
more information, see Creating, editing, and manipulating jobs.)
-
In the job editor, click the General tab, and
specify the file containing the user subroutine FILM. For more
information, see Specifying general job settings.
Note:
You can specify only one user subroutine file in the
job editor; if your analysis involves more than one user subroutine,
you must combine the user subroutines into one file and then specify
that file.
-
Check the Toggle on dynamic surface activation check box
to specify the film condition on the evolving faces of an element.
-
Click OK to create the interaction and to close the
editor.
|