-
From the main menu bar, select .
-
In the Create Interaction dialog box that appears, do the
following:
-
Name the interaction.
For more information about naming objects, see Using basic dialog box components.
-
Select the step.
You can define radiation from a nodal area only during a heat
transfer, coupled temperature-displacement, coupled thermal-electrical,
coupled thermal-electrochemical, coupled thermal-electrochemical
structure, or coupled thermal-electrochemical structure pore pressure
step.
-
Select the Concentrated radiation to ambient type
of interaction.
-
Click Continue to close the Create
Interaction dialog box.
-
Use one of the following methods to select the points:
-
Use an existing set of nodes or vertices to define the region. On the
right side of the prompt area, click Sets.
Select an existing set from the Region
Selection dialog box that appears, and click
Continue. Note:
The default
selection method is based on the selection method you most
recently employed. To revert to the other method, click
Select in Viewport or
Sets on the right side of the prompt
area.
-
Use the mouse to select nodes or vertices in the viewport. (For more
information, see Selecting objects within the current viewport.)
If the model contains a combination of mesh and geometry, click one
of the following from the prompt area:
You can use the angle method to select a group of nodes from a mesh.
For more information, see Using the angle and feature edge method to select multiple objects.
-
In the Edit Interaction dialog box that appears, perform
the following steps:
-
If desired, specify how the concentrated radiation condition is applied
to the boundary of an adaptive mesh domain. This option is valid only
for Abaqus/Explicit analyses. Click the arrow to the right of the Adaptive mesh
boundary type field, and select an option from the list
that appears. For more information, see Defining ALE Adaptive Mesh Domains in Abaqus/Explicit.
-
Select Lagrangian to apply a
concentrated radiation condition to a node that follows the
material (nonadaptive).
-
Select Sliding to apply a concentrated
radiation condition to a node that can slide over the
material. Mesh constraints are typically applied to the node
to fix it spatially.
-
Select Eulerian to apply a concentrated
radiation condition to a node that can move independently of
the material. This option is used only for boundary regions
where the material can flow into or out of the adaptive mesh
domain. Mesh constraints must be used normal to an Eulerian
boundary region to allow material to flow through the
region. If no mesh constraints are applied, an Eulerian
boundary region will behave in the same way as a sliding
boundary region.
-
In the Associated nodal area field, enter the area
associated with the node where the concentrated radiation condition is
applied.
-
Click the arrow to the right of the Emissivity
distribution field, and select the option of your choice
from the list that appears:
-
Select Uniform to define an emissivity
that is uniform over the region.
-
Select an analytical field to define a spatially varying
emissivity. Only analytical fields that are valid for this
interaction type are displayed in the selection list.
Alternatively, you can click
to
create a new analytical field. (See The Analytical Field toolset for more information.)
-
In the Emissivity field, enter the emissivity of
the surface,
.
-
In the Ambient temperature field, enter the
ambient temperature,
.
- Optional:
If you want to vary the ambient temperature with time, click the arrow
to the right of the Ambient temperature amplitude
field and select an amplitude from the list that appears. If desired,
click
to create a new
amplitude; see Selecting an amplitude type to define, for more
information.
-
Specify the absolute zero temperature,
, on the temperature scale being used and the Stefan-Boltzmann
constant,
, in the Edit Model Attributes dialog box,
as described in Specifying model attributes.
-
Click OK to create the interaction and to close the
editor.
|