Context: To use the parameter update capability, you must first use the CAD system (CATIA V5,
CATIA V6, or Creo Parametric) to indicate which model
dimensions can be modified within Abaqus/CAE. The modifiable dimensions must be defined in terms of feature-level parameters, which
are imported into Abaqus/CAE along with the model. For example, a parameter might be associated with the radius of a
hole in the model; modifying the value of that parameter also modifies the radius of the
hole. Each parameter name must begin with the string The CATIA V5 Associative Interface, the CATIA V6 Associative Interface, and the Abaqus Associative Interface for Creo Parametric use a special parameters (.par_abq) file to pass parameters to Abaqus/CAE. For more information about defining modifiable parameters in an imported CATIA V5, CATIA V6, or Creo Parametric model, refer to the CATIA V5 Associative Interface, the CATIA V6, or the Abaqus Associative Interface for Creo Parametric User's Guides. These guides are available from the Dassault Systèmes Knowledge Base at http://support.3ds.com/knowledge-base/. You can use the CAD Parameters dialog box in Abaqus/CAE to assign new values to the imported parameters. When you change a parameter value, the associated geometry feature is regenerated both in the Abaqus/CAE model and in the saved CAD model. This dialog box also enables you to keep the CAD software running in the background after you make a change to CAD parameters. Having the CAD software running in the background improves performance for bidirectional parameter update, but this option occupies a license for your CAD software for the remainder of your session. | ||||||||||