The following methods are available:
- Onset of cracking
-
The onset of cracking can be studied in quasi-static problems by using contour
integrals (Contour Integral Evaluation). The
J-integral, the
-integral (for creep), the stress intensity factors for both
homogeneous materials and interfacial cracks, the crack propagation direction, and the
T-stress are calculated by Abaqus/Standard. Contour integrals can be used in two- or three-dimensional problems. In these types
of problems, focused meshes are generally required and the propagation of a crack is not
studied.
- Crack propagation
-
The crack propagation capability allows quasi-static, including low-cycle fatigue,
crack growth along predefined paths to be studied (Crack Propagation Analysis). Cracks debond along user-defined surfaces.
Several crack propagation criteria are available, and multiple cracks can be included in
the analysis. Contour integrals can be requested in crack propagation problems.
- Line spring elements
-
Part-through cracks in shells can be modeled inexpensively by using line spring
elements in a static procedure, as explained in Line Spring Elements for Modeling Part-through Cracks in Shells.
- Extended finite element method
(XFEM)
-
XFEM models a crack as an enriched feature by adding
degrees of freedom in elements with special displacement functions (Modeling Discontinuities as an Enriched Feature Using the Extended Finite Element Method). XFEM does not
require the mesh to match the geometry of the discontinuities. It can be used to
simulate initiation and propagation of a discrete crack along an arbitrary,
solution-dependent path without the requirement of remeshing. You can also use
XFEM to perform contour integral evaluation for an
arbitrary stationary surface crack without the need to define a conforming mesh around
the crack tip.
- Fatigue crack growth with adaptive remeshing
-
Fatigue crack growth with adaptive remeshing is based on Abaqus fracture/fatigue technology in conjunction with tetrahedral element–based adaptive
remeshing technology (Fatigue Crack Propagation with Adaptive Remeshing). The
stress intensity factors are calculated based on the conventional contour integral
method (Contour Integral Evaluation). The crack growth is governed by
Paris’ law (Fatigue Crack Growth Laws for Linear Elastic Materials).
The tetrahedral element–based adaptive remeshing technology is utilized to create a new
mesh after each increment of crack growth. The new mesh conforms to the updated crack
front. The overall fatigue workflow is semiautomated and involves automatic execution
(with no user intervention) of a series of successive Abaqus fatigue analyses with progressively longer crack lengths.