OBJ_FUNC


ID_NAME	= <`id_name_of_obj_func`>	Name of the objective function.
DRESP	= <`name_of_DRESP`>, <`weight_fact`>, <`ref_val`>
	<`name_of_DRESP`>	Name of the design response.
	<`weight_fact`> = 1.0	Weight of the design response.
	<`ref_val`> = 0.0	Reference value.
TARGET	= MIN	Target is to minimize the list of design responses (`DRESP`s).
	= MAX	Target is to maximize the list of design responses (`DRESP`s).
	= MINMAX	Target is to minimize the maximum of the list of design responses.
	= MAXMIN	Target is to maximize the minimum of the list of design responses. (Only for sizing, topology and controller-based shape optimization.)

Remarks

The item DRESP can be repeated several times.
If more than one DRESP entry is specified in the objective function the weight factor defines the weight of the particular entry of the objective function.
The reference value is only used for the MINMAX / MAXMIN formulation.

For BEAD:

Minimize the design response dresp_compliance:

OBJ_FUNC
  ID_NAME = objective
  DRESP   = dresp_compliance
  TARGET  = MIN
END_

For SHAPE:

Minimize the design response maximum_stress:

OBJ_FUNC
  ID_NAME = objective
  DRESP   = maximum_stress
  TARGET  = MIN
END_

For sensitivity-based topology optimization:

Minimize the objective function consistent of the volume (weight factor 1.0) plus the displacement design response with the factor 1.5.

OBJ_FUNC
  ID_NAME = objective
  DRESP   = volume
  DRESP   = disp_x_nd_113, 1.5
  TARGET  = MIN
END_

Minimize the maximum difference of the DRESP entry to the specified reference value for the entered DRESP.

OBJ_FUNC
  ID_NAME = objective
  DRESP   = freq_1, 1.0, 100.0
  DRESP   = freq_2, 1.0, 120.0
  DRESP   = freq_3, 1.0, 130.0
  TARGET  = MINMAX
END_

Maximize the minimum difference of the DRESP entry to the specified reference value for the entered DRESP.

OBJ_FUNC
  ID_NAME = objective
  DRESP   = rf_1, 1.0, 10.0
  DRESP   = rf_2, 1.0, 12.0
  DRESP   = rf_3, 1.0, 13.0
  TARGET  = MAXMIN
END_