You can define the following types of kinematic constraints:
- Linear multi-point constraints in the form of equations.
- Multi-point constraints that specify linear or nonlinear constraints between nodes.
- In Abaqus/Standard kinematic coupling constraints that allow general node-by-node specification of
constrained degrees of freedom.
- Surface-based tie constraints that tie two surfaces together.
- Surface-based coupling constraints that constrain a group of nodes located on a surface to
a reference node.
- Surface-based shell-to-solid coupling couples an edge-based surface on a three-dimensional
shell element mesh to an element- or node-based surface on a three-dimensional solid mesh.
- Mesh-independent fasteners (such as spot welds) can bond together two or more surfaces.
- Embedded elements that lie embedded in a group of "host" elements in a model.
- In Abaqus/Standard local rotational degree of freedom or a combination of local rotational degrees of
freedom can be released at one or both ends of a beam element.