Exporting the LTPA Key from the SIMULIA Execution Engine

You need to export the LTPA key from the WebSphere profile running the SIMULIA Execution Engine. This key will be used in the WebSphere profile running the WebTop/WebDashboard.

  1. Access the WebSphere Integrated Solutions Console for the system running the SIMULIA Execution Engine.
  2. On the left side of the console, click Security.
  3. Click Global security.
  4. In the Authentication area on the right side of the console, verify that LTPA is selected.
  5. Click LTPA.
  6. In the Cross-cell single sign-on area, type a password and confirm the password in the corresponding text boxes.

    Be sure to make note of this password. It will be used later when importing keys.

  7. In the Fully qualified key file name text box, type a key file name.

    You can use any name you like (for example, seecomputer.key). Be sure to make note of this file name. It will be used later when importing keys.

  8. Click Export keys.

    A message appears stating that the export was successful.

  9. Copy the exported file to an accessible directory on the system running the WebTop/WebDashboard WebSphere instance.

    If the WebTop/WebDashboard is being installed on a different system from the SIMULIA Execution Engine, you should place this file in a shared directory that can be accessed for the WebTop/WebDashboard system.

    The file should be located in the <websphere_install_dir>\profiles\AppSrv01 directory on the system running the SIMULIA Execution Engine.

  10. Log out of the WebSphere Integrated Solutions Console for the SIMULIA Execution Engine.