*Heading
** Job name: O-ring-Thick Model name: O-ring-Thick
** Generated by: Abaqus/CAE 2022 
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=RGLAND
*End Part
**  
*Part, name=RTop
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, instance=O-ring-1, library=O-ring_Thick_local_std
*Import, step=1, state=yes, update=no
*IMPORT SURFACE
O-RING-1.OUTSIDE
*IMPORT NSET
O-RING-1.InitWetNode
*End Instance
**  
*Instance, name=RTop-1, part=RTop
*Node
      1,          20.,           1.1,           0.
*Nset, nset=RTop-1-RefPt_, internal
1, 
*Nset, nset=RTop_RP
 1,
*Surface, type=SEGMENTS, name=RTop
START,          30.,           0.1
 LINE,          10.,           0.1
*Rigid Body, ref node=RTop-1-RefPt_, analytical surface=RTop
*End Instance
**  
*Instance, name=RGLAND-1, part=RGLAND
*Node
      1,          20.,          -7.,           0.
*Nset, nset=RGLAND-1-RefPt_, internal
1, 
*Nset, nset=RGLAND_RP
 1,
*Surface, type=SEGMENTS, name=RGLAND
START,         14.7,          0.1
 LINE,         15.9,          0.1
 LINE,         16.7,          -6.
 LINE,         23.3,          -6.
 LINE,         24.1,          0.1
 LINE,         25.3,          0.1
*Rigid Body, ref node=RGLAND-1-RefPt_, analytical surface=RGLAND
*End Instance
**  
*End Assembly
*Amplitude, name=Smooth_BC, definition=SMOOTH STEP
             0.,              0.,              0.7,              1.
** 
** MATERIALS
** 
*MATERIAL,NAME=RUBFIB
*Density
 0.01,
*Hyperelastic
1000.,    0., 0.00001
** 
** INTERACTION PROPERTIES
** 
*Surface Interaction, name=Contact
*Friction
0.01
** 
** INTERACTIONS
** 
** Interaction: Contact
*Contact, op=NEW
*Contact Inclusions, ALL EXTERIOR
*Contact Property Assignment
 ,  , Contact
** ----------------------------------------------------------------
** 
** STEP: Fluid Pressure Loading
** 
*Step, name="Fluid Pressure Loading", nlgeom=YES
*Dynamic, Explicit
, 0.1
**
*Bulk Viscosity
0.06, 1.2
**
** Mass Scaling
**
*Variable Mass Scaling, dt=1.e-05, type=below min, frequency=1
** 
** BOUNDARY CONDITIONS
** 
** Name: Fixed_Bottom Type: Velocity/Angular velocity
*Boundary, op=NEW, type=VELOCITY
RGLAND-1.RGLAND_RP, 1, 1
RGLAND-1.RGLAND_RP, 2, 2
RGLAND-1.RGLAND_RP, 6, 6
** Name: Fixed_Top Type: Velocity/Angular velocity
*Boundary, op=NEW, type=VELOCITY
RTop-1.RTop_RP, 1, 1
RTop-1.RTop_RP, 2, 2
RTop-1.RTop_RP, 6, 6
** 
** LOADS
** 
** Name: Surface_Loading_Fluid   Type: Pressure
*Dsload
O-ring-1.REGION, PPEN, 750., 0., LOCAL
** 
** OUTPUT REQUESTS
** 
*Restart, write, number interval=1, time marks=NO
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field, variable=PRESELECT, time interval=5.E-4
*Node Output
U, 
*Contact Output
CSTRESS, CDISP, PPRESS, PFORCE
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, frequency=1, variable=pre
*Contact Output, surface=O-ring-1.REGION
PFN
*End Step