Selecting the Radiation Output Variables
The radiation output variables that can be written to the output database are listed in Cavity Radiation Variables.
Input File Usage
RADIATION OUTPUT list of output variables
ProductsAbaqus/Standard The output request can be repeated as often as necessary to define output for different variables, different cavities, different element sets, different surfaces, etc. Selecting the Radiation Output VariablesThe radiation output variables that can be written to the output database are listed in Cavity Radiation Variables. Input File Usage RADIATION OUTPUT list of output variables Selecting the Region of the Model for Which Radiation Output Is RequiredYou can specify the cavity, element set, or surface for which radiation output is required. Each radiation output request can apply to only one type of region. If you do not specify a region of the model, radiation variables are output for all the cavities in the model. Input File Usage Use one of the following options: RADIATION OUTPUT, CAVITY=cavity_name RADIATION OUTPUT, ELSET=element_set_name RADIATION OUTPUT, SURFACE=surface_name Controlling the Output FrequencyThe frequency of radiation output is controlled as described in Controlling the Frequency of Output to the Output Database. Requesting OutputYou can request all radiation variables applicable to the current procedure. In this case any additional variables you specify are ignored. Input File Usage RADIATION OUTPUT, VARIABLE=ALL | ||||||||||||