*SURFACE PROPERTY

Define surface properties for cavity radiation.

This option is used to define surface properties for cavity radiation analysis. It must immediately precede the EMISSIVITY option.

This page discusses:

See Also
*EMISSIVITY
In Other Guides
Cavity Radiation in Abaqus/Standard

ProductsAbaqus/StandardAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEInteraction module

Required parameters

NAME

Set this parameter equal to a label that will be used to refer to the property name for cross-referencing to the surface definitions for which properties are being defined. Only element-based surfaces can be used.

There are no data lines associated with this option.