ProductsAbaqus/Standard
TypeHistory data
LevelThis option is not supported in a model defined in terms of an assembly of part instances.
Optional parameters
- FILE NAME
-
This parameter is intended for use with OUTPUT FILE=USER DEFINED.
Set this parameter equal to the name of the file (without an extension) to
which the data will be written. The extension .mtx will be
added to the file name provided by the user; see
Input Syntax Rules
for the syntax of such file names.
If the OUTPUT FILE parameter is omitted or set equal to RESULTS FILE, use of the FILE NAME parameter overrides the OUTPUT FILE setting; the data will be written to the named file, not to the
results (.fil) file.
- GRAVITY LOAD
-
Set GRAVITY LOAD=YES to write the substructure gravity load vectors (only available
if the gravity load vectors are requested with the
SUBSTRUCTURE GENERATE option). The default is GRAVITY LOAD=NO.
- MASS
-
Set MASS=YES to write the substructure mass matrix (only available if the
mass matrix is requested with the
SUBSTRUCTURE GENERATE option). The default is MASS=NO.
- OUTPUT FILE
-
Set OUTPUT FILE=RESULTS FILE (default) to write the data to the results
(.fil) file in the format specified in
Results File.
Set OUTPUT FILE=USER DEFINED to write the results to a user-specified file in the format of
the
USER ELEMENT, LINEAR option (User-Defined Elements).
The name of the file is specified using the FILE NAME parameter.
- RECOVERY MATRIX
-
Set RECOVERY MATRIX=YES to write the substructure recovery matrix (only available if
the recovery matrix is requested with the
SUBSTRUCTURE GENERATE option). The default is RECOVERY MATRIX=NO.
- SLOAD
-
Set SLOAD=YES to write the substructure load case vectors. The default is SLOAD=NO.
- STIFFNESS
-
Set STIFFNESS=YES to write the substructure stiffness matrix. The default is STIFFNESS=NO.
There are no data lines associated with this option.