*SUBMODEL CONDITIONS

Specify that submodel conditions are to be imposed on cut surfaces during this step.

This option is used together with instances of the SUBMODEL CUT suboption to impose submodel conditions on the cut surface of a submodel. Submodel conditions can be specified only once per step.

This page discusses:

See Also
In Other Guides
About Submodeling
Beam-to-Solid Submodeling

Products Abaqus/Standard

Type History data

LevelStep

Required parameters

GLOBAL STEP

Set this parameter equal to the step number in the global analysis for which the values of the driven variables will be read during this step of the submodel analysis.

INC

This parameter can be used only in a static linear perturbation step.

Set this parameter equal to the increment in the selected step of the global analysis at which the solution will be used to specify the values of the driven variables. By default, Abaqus/Standard uses the solution at the last increment of the selected step.

Optional parameters

AMPLITUDE SCALE

Set this parameter equal to the value by which the driven variables read from the global analysis are to be scaled.

The default is AMPLITUDE SCALE=1.0.

TIME SCALE

If the submodel analysis step time is different from the global analysis step time, use the TIME SCALE parameter to adjust the time variable for the driven nodes' amplitude functions. The time variable of each driven node's amplitude function is scaled to match the submodel analysis step time.

If this parameter is omitted, the time variable is not scaled.

There are no data lines associated with this option.