ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE
TypeModel data
LevelModel
Abaqus/CAEProperty module
Optional parameters
- PORE FLUID
-
This parameter applies only to
Abaqus/Standard
analyses.
Include this parameter if the latent heat of the pore fluid in a porous
medium is being defined.
- SMOOTH
-
This parameter applies only to
Abaqus/Standard
analyses.
Include this parameter to use a smooth transition from solidus to liquidus
temperature.
Data lines to
define a material's latent heat
- First line
-
Latent heat per unit mass. (Units of JM−1.)
-
Solidus temperature.
-
Liquidus temperature.
-
Scale factor to extend the solidus-liquidus temperature interval. The
default value is 1.0.
Repeat this data line as
often as necessary to define phase changes in the material; one line per phase
change. Latent heat values must be given in ascending order of
temperature.