*FLUID FLUX

Change the amount of fluid in a fluid-filled cavity.

This option is used to specify a change in the amount of fluid in a fluid-filled cavity modeled with hydrostatic fluid elements.

This page discusses:

See Also
In Other Guides
Fluid Exchange Definition

ProductsAbaqus/StandardAbaqus/Explicit

TypeHistory data

LevelStep

Optional parameters

AMPLITUDE

Set this parameter equal to the name of the amplitude versus time curve that defines the magnitude of the mass flow rate during the step (Amplitude Curves). If this parameter is omitted, the reference magnitude is applied immediately at the beginning of the step, regardless of the procedure being used in the step.

OP

Set OP=MOD (default) for existing fluid fluxes to remain, with this option defining fluid fluxes to be added (to cavities with no fluid flux loading) or modified (to cavities with fluid flux loading).

Set OP=NEW if all existing fluid fluxes applied to the model should be removed.

Data line to define the fluid mass flow rate

First (and only) line

  1. Node number or node set label of the cavity reference node.

  2. Reference magnitude of the fluid mass flow rate, q. (Units of MT−1.)