Products
Abaqus/Standard
Abaqus/Explicit
Abaqus/CAE
Type
Model data
LevelModel
Abaqus/CAE
Property module
Optional parameters
-
DEPENDENCIES
-
Set this parameter equal to the number of field variables included in the definition
of the density, in addition to temperature. If this parameter is omitted, it is
assumed that the density is constant or depends only on temperature. See Material Data Definition for more information.
This parameter is not relevant in an Abaqus/Standard analysis if spatially varying density is defined using a distribution. See Distribution Definition.
-
PORE FLUID
-
This parameter applies only to Abaqus/Standard analyses.
Include this parameter if the density of the pore fluid in a porous medium is being
defined.
-
SLURRY
-
This parameter applies only to Abaqus/Standard analyses.
Include this parameter to define the mass density of the carrier fluid and the solid
particles, respectively, as well as the particle diameter.
Data lines to define mass density
- First line
-
-
Mass density. (Units of ML−3.)
-
Temperature.
-
First field variable.
-
Second field variable.
-
Etc., up to six field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than six)
-
-
Seventh field variable.
-
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
density as a function of temperature and other predefined field
variables.
Data lines to define mass density and the proppant particle diameter with the
SLURRY parameter
- First (and only) line
-
-
Mass density of the carrier fluid. (Units of ML−3.)
-
Mass density of the proppant particles. (Units of
ML−3.)
-
Diameter of the proppant particles.
Data line to define spatially varying mass density for solid continuum elements
in an Abaqus/Standard analysis using a distribution
- First (and only) line
-
-
Distribution name. The data defined in the distribution must be in units of
ML−3.