*CYCLED PLASTIC

Specify cycled yield stress data for the ORNL model.

This option is used to specify the tenth-cycle yield stress and hardening values for the ORNL constitutive model. It is relevant only if the ORNL option is used.

This page discusses:

See Also
*ORNL
In Other Guides
ORNL – Oak Ridge National Laboratory Constitutive Model

ProductsAbaqus/StandardAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

There are no parameters associated with this option.

 

Data lines to specify cycled yield stress data

First line

  1. Yield stress.

  2. Plastic strain.

  3. Temperature.

Repeat this data line as often as necessary to define the dependence of yield stress on plastic strain and, if needed, on temperature.