-
COARSENING
-
This parameter is valid only when
ENHANCED CONTACT=NO.
Set
COARSENING=YES
(default) to specify that refinement can be removed once the refinement criteria are
no longer met.
Set
COARSENING=NO
to specify that refinement cannot be removed even when the refinement criteria are no
longer met.
-
ENHANCED CONTACT
-
Set
ENHANCED CONTACT=YES
to activate the enhanced contact formulation that acts to prevent the potential
leakage of liquid or gas through the Lagrangian surfaces.
Set
ENHANCED CONTACT=NO
(default) to deactivate the enhanced contact formulation for the Eulerian-Lagrangian
interfaces.
- LEVEL
-
This parameter is valid only when
ENHANCED CONTACT=NO.
Set this parameter equal to the maximum number of levels of refinement. The
default value is 1.
- RATIO
-
Set this parameter equal to the ratio of the maximum increase in the number of elements during
mesh refinement compared to the original number of elements in the specified element
set. The default value is 8.0 when
ENHANCED CONTACT=NO
and is 1.0 when
ENHANCED CONTACT=YES.