Environment File Settings

The Abaqus environment settings allow you to control various aspects of an Abaqus job's execution. For example, you can

“Tune” Abaqus to improve its performance by changing memory-related parameters.
Control where and how scratch files are written.
Provide default values for job parameters that would otherwise have to be given on the command line.

Many other aspects of a job's execution can be configured through the environment settings. Some of these are discussed in this section; others, which are mainly of interest to the Abaqus site manager, are discussed in detail in the Abaqus Configuration Guide.

This page discusses:

Environment Settings Hierarchy
Syntax
Troubleshooting
Command Line Default Parameters
System Resource Parameters
System Customization Parameters
Co-Simulation Parameters
Environment File Examples

Environment Settings Hierarchy

Abaqus environment settings are processed in the following order:

The host-level environment settings. These settings are applied to all Abaqus jobs run on the designated computer.
The user-level environment settings. These settings are applied to all Abaqus jobs run in your account.

For Abaqus to locate the environment file in your home directory on Windows platforms, the full path to your home directory must be specified using the HOME environment variable or a combination of the HOMEDRIVE and HOMEPATH environment variables.
The job-level environment settings. These settings are applied to only the designated Abaqus job.

Environment settings can be specified more than once. The last value processed will be the one used for the setting if it is defined at more than one level or if it is given twice at the same level.

Abaqus environment settings are set using special files in specific directories. The host-level (site-level) settings are set in the install_dir/os/SMA/site/custom_v6.env file or abaqus_v6.env file in the installation. You can change these settings by creating an environment file named abaqus_v6.env in your home directory and/or the current directory. Settings in the home directory file will be applied to all jobs that you run. Settings in the current directory file will be applied only to jobs run from the current directory.

Syntax

The entries given in the environment file must be given using Python language syntax. Entries take the form:

parameter=value

The following is a brief overview of the Python syntax rules:

The parameter must always have a value. The value can be any valid Python constant or expression.
A string value must be enclosed in a pair of double or single quotes.
Comments are preceded by a number sign (#). All characters following a number sign on a line are ignored. Number signs within a quoted string are part of the string, not the beginning of a comment.
Blank lines are ignored.
Embedded single quotes do not require special handling if they are placed within a double quoted string. For example, "my value's" is translated as my value's. The same holds true for double quotes embedded in a single quoted string. Quotes of the same type as the enclosing quotes can be embedded if they are prefixed by the backslash (\) character.
Triple quoted (""") strings can span more than one line, and no special treatment of quotes within the string is necessary. Entries take the form:
```
parameter="""
multi-line
value
"""
```
Lists must be enclosed in parentheses (( )) or square brackets ([ ]). Individual items in the list are separated by commas. If the list is enclosed in parentheses and contains only one value, a comma has to follow the value. String list items must be enclosed in quotes. Entries take the form:
```
parameter=(value1, value2, value3)
```

Troubleshooting

Problems caused by faulty environment settings can be diagnosed by using the command

abaqus information=environment

This command prints all of the current environment settings.

Command Line Default Parameters

The following parameters provide default values for various settings that would otherwise have to be specified on the command line (see Abaqus/Standard and Abaqus/Explicit Execution, and Abaqus/Standard, Abaqus/Explicit, and FMU Co-Simulation Execution). Values given on the command line override values specified in the environment files.

cpus: Number of processors to use if parallel processing is available. The default is 2 for the co-simulation execution procedure; otherwise, the default is 1.
domains: The number of parallel domains in Abaqus/Explicit. If the value is greater than 1, the domain decomposition will be performed regardless of the values of the parallel and cpus parameters. However, if parallel=domain, the value of cpus must be evenly divisible into the value of domains. If this parameter is not set, the number of domains defaults to the number of processors used during the analysis run if parallel=domain or to 1 if parallel=loop.
double_precision: The default precision version of Abaqus/Explicit to run if you do not specify the precision version on the abaqus command line. Possible values are EXPLICIT (only the Abaqus/Explicit analysis is run in double precision), BOTH (both the Abaqus/Explicit packager and analysis are run in double precision), CONSTRAINT (the constraint packager and constraint solver in Abaqus/Explicit are run in double precision, while the Abaqus/Explicit packager and analysis continue to run in single precision), or OFF (both the Abaqus/Explicit packager and analysis are run in single precision). The default is OFF.
parallel: The default parallel method in Abaqus/Explicit if you do not specify the parallel method on the abaqus command line. Possible values are DOMAIN or LOOP; the default value is DOMAIN.
run_mode: Default run mode (interactive, background, or batch) if you do not specify the run mode on the abaqus command line. The default for abaqusanalysis and abaqussysVerify is "background", while the default for abaqusviewer is "interactive".
scratch: Directory to be used for scratch files. This directory must exist (i.e., it will not be created by Abaqus) and must have write permission assigned. On Linux platforms the default value is the value of the $TMPDIR environment variable or /tmp if $TMPDIR is not defined. On Windows platforms the default value is the value of the %TEMP% environment variable or \TEMP if this variable is not defined. During the analysis a subdirectory will be created under this directory to hold the analysis scratch files. The name of the subdirectory is constructed from your user name, the job id, and the job's process identifier. The subdirectory and its contents are deleted upon completion of the analysis.
standard_parallel: The default parallel execution mode in Abaqus/Standard if you do not specify the parallel mode on the abaqus command line. If this parameter is set equal to ALL, both the element operations and the solver will run in parallel. If this parameter is set equal to SOLVER, only the solver will run in parallel. The default parallel execution mode is ALL.
gpus: The GPGPU direct solver acceleration setting in Abaqus/Standard if you do not specify the GPGPU solver acceleration option on the abaqus command line. By default, GPGPU solver acceleration is not activated. The value of this parameter is the number of GPGPUs to be used in an Abaqus/Standard analysis. In an MPI-based analysis, this is the number of GPGPUs to be used on each host.
unconnected_regions: If this variable is set to ON, Abaqus/Standard will create element and node sets in the output database for unconnected regions in the model during a datacheck analysis. Element and node sets created with this option are named MESH COMPONENT N, where N is the component number. The default value is OFF.
order_parallel: The ordering mode for the direct sparse solver in Abaqus/Standard if you do not specify the ordering mode on the abaqus command line. If this parameter is set equal to OFF, the ordering procedure will not run in parallel. If this parameter is set equal to ON, the ordering procedure will run in parallel. The default ordering mode is ON.

System Resource Parameters

The following environment file variable can be set after the code has been installed to change the resources used by Abaqus and, therefore, to improve system performance. By default, Abaqus detects the physical memory on a machine (or on each compute node in a cluster) and allocates a percentage of the available memory. The default percentage is 80%. You can override the default percentage by specifying a number followed by the percentage sign. The variable can also be defined as the number of megabytes or the number of gigabytes. More detailed information about changing the system resources used by Abaqus is given in Managing Memory and Disk Resources.

memory: Maximum amount of memory or maximum percentage of the physical memory that can be allocated during the input file preprocessing and during the Abaqus/Standard analysis phase. For parallel execution on computer clusters, this memory limit specifies the maximum amount of memory that can be allocated on each process.

System Customization Parameters

The following is a discussion of some additional environment file parameters that are commonly used. A complete listing of parameters can be found in the Abaqus Configuration Guide.

ask_delete

If this parameter is set equal to OFF, you will not be asked whether old job files of the same file name should be deleted; the files will be deleted automatically. The default value is ON.

auto_calculate

If this parameter is set to ANALYSIS, all output database postprocessing in Abaqus/Standard is performed as part of analysis execution. If this parameter is set to ON, output database postprocessing is performed by the postprocessing calculator at the end of an analysis if the execution procedure detects that output database postprocessing is necessary. If this parameter is set to OFF, no output database postprocessing occurs even if the execution procedure detects that it is necessary to postprocess the output database file. The default value is ANALYSIS. In Abaqus/Explicit auto_calculate=ANALYSIS is equivalent to auto_calculate=ON.

auto_convert

If this parameter is set equal to ON and an Abaqus/Explicit analysis is run in parallel with parallel=domain, the convert=select, convert=state, and convert=odb options will be run automatically at the end of the analysis. The default value is ON.

average_by_section

This parameter is used only for an Abaqus/Standard analysis. If this parameter is set equal to OFF, the averaging regions for output written to the data (.dat) file and results (.fil) file are based on the structure of the elements. If this parameter is set equal to ON, the averaging regions also take into account underlying values of element properties and material constants. In problems with many section and/or material definitions the default value of OFF will, in general, give much better performance than the nondefault value of ON. See Output to the Data and Results Files for further details on the averaging scheme.

mp_host_list

List of host machine names to be used for an MPI-based parallel Abaqus analysis, including the number of processors to be used on each machine; for example,

mp_host_list=[['maple',1],['pine',1],['oak',2]]

indicates that, if the number of cpus specified for the analysis is 4, the analysis will use one processor on a machine called maple, one processor on a machine called pine, and two processors on a machine called oak. The total number of processors defined in the host list has to be greater than or equal to the number of cpus specified for the analysis. If the host list is not defined, Abaqus will run on the local system. When using a supported queuing system, this parameter does not need to be defined. If it is defined, it will get overridden by the queuing environment.

mp_mode

Set this variable equal to MPI to indicate that the MPI components are available on the system. Set mp_mode=THREADS to use the thread-based parallelization method. The default value is MPI where applicable.

odb_output_by_default

If this parameter is set equal to ON, output database output will be generated automatically. If this parameter is set equal to OFF, output database request keywords must be placed in an input file to obtain output database output. The default value is ON.

onCaeStartup

Optional function to be executed before Abaqus/CAE begins. See Customizing Abaqus/CAE startup for examples of this function.

Co-Simulation Parameters

The following environment file variables provide default settings for co-simulation between solvers using the direct coupling interface. This includes Abaqus/Standard to Abaqus/Explicit co-simulation and co-simulation between Abaqus and certain third-party analysis programs.

cosimulation_port: Set cosimulation_port equal to the port number used for the connection. The default value is 48000.
cosimulation_timeout: Set cosimulation_timeout equal to the timeout period in seconds. Abaqus terminates if it does not receive any communication from the coupled analysis program during the time specified. The default value is 3600 seconds.

The following environment file variables provide settings that allow you to allocate CPUs for co-simulation jobs submitted using the co-simulation execution procedure. This includes Abaqus/Standard to Abaqus/Explicit co-simulation (see Abaqus/Standard, Abaqus/Explicit, and FMU Co-Simulation Execution).

cpus_weight_std: This option controls the allocation of CPUs to Abaqus/Standard analyses. The actual CPU allocation for Abaqus/Standard analyses is made in proportion to this value and considering the settings of cpus_weight_xpl and cpus.
cpus_weight_xpl: This option controls the allocation of CPUs to Abaqus/Explicit analyses. The actual CPU allocation for Abaqus/Explicit analyses is made in proportion to this value and considering the settings of cpus_weight_std and cpus.
portpool: Set this variable equal to a colon-separated pair of TCP/UDP port numbers that represents the start and end value of port numbers to be used by the co-simulation execution procedure when establishing connections between the child processes.

Environment File Examples

Example environment files that use some of the previously discussed parameters are shown below. A sample environment file, named abaqusinc.env, is included in the site subdirectory of the release to show the options used at SIMULIA.

Linux Environment File:

ask_delete=OFF
# The following parameter causes the scratch files to 
# be written to /tmp.
scratch="/tmp"

Windows Environment File:

ask_delete=OFF
# The following parameter causes the scratch files to 
# be written to the tmp directory on c:.
scratch="c:/tmp"