-
Locate the Data or Data
Values options.
- For a report of
X–Y data or field output:
-
From the main menu bar, select
or ; then click the Setup
tab in the dialog box that appears. The Data options are
at the bottom of the page.
- For a
report of probe values:
-
From the main menu bar, select
,
then click Probe values in the dialog box that appears.
The Probe Values dialog box appears.
Move the cursor to probe the model or X–Y
plot in the current viewport, then click mouse button 1 to store values of
interest in the dialog box. When you are finished, click Write to
File. The Report Probe Values dialog box
appears; the Data Values options are at the bottom of the
dialog box.
-
For X–Y data reports or field output
reports, you must choose one or more of the following items to include in your
report. If you generate field output reports in comma-separated value
(CSV) format, the options to include column
totals and to include a summary of the minimum and maximum values are
unavailable.
-
Toggle XY data or Field
output to include the actual X–Y data or
field output values, respectively. Toggling this option off results in a report
that consists of only the column total or min/max data you request.
-
Toggle Column totals to include totals for
each column.
-
Toggle Column min/max to include a summary of
the minimum and maximum value occurring in each column.
To generate your report, configure the remaining options in the dialog box;
then click Apply (for X–Y
reports or field output reports) or OK (for probe values
reports). When you have finished, click Cancel to close
the dialog box.