-
Display the Edit Profile dialog box, as described in Choosing a profile type.
-
In the l field, enter the distance between the lower edge
of the bottom flange and the local cross-section 1-axis.
-
In the h field, enter the height of the channel section,
from the bottom edge to the top edge.
-
In the b1 field, enter the width of the lower flange of
the channel section.
-
In the b2 field, enter the width of the upper flange of
the channel section.
-
In the t1 field, enter the thickness of the lower flange
of the channel section.
-
In the t2 field, enter the thickness of the upper flange
of the channel section.
-
In the t3 field, enter the thickness of the segment
joining the upper and lower flanges of the channel section.
-
In the o field, enter the distance between the left edge
of the web section and the local cross-section 2-axis of the channel
section.
-
Click OK to save the profile and to close the
Edit Profile dialog box.
|