Requesting contour integral output

You use the History Output Request editor in the Step module to request output from the contour integral analysis. You must select Crack from the Domain field. The editor then allows you to select the output frequency and the type of contour integral analysis to perform. For more information, see Modifying history output requests, and Contour Integral Evaluation.

Context:

You can also request contour integral output for an XFEM fracture analysis. For more information, see Requesting contour integral output for XFEM.

  1. Enter the Step module.
  2. From the main menu bar, select OutputHistory Output RequestCreate.

    Abaqus/CAE displays the Create History dialog box.

  3. From the Create History dialog box, enter the name of the output request and the step in which it will be created. Click Continue to close the dialog box.

    Abaqus/CAE displays the History Output Requests editor.

  4. From the Domain field, select Crack, and select the desired contour integral.
  5. From the fields that appear in the History Output Requests editor, enter the output frequency.
  6. Enter the number of contours to evaluate. Abaqus/CAE computes the next contour integral by adding a single layer of elements to the region defined by the previous domain, as described in Figure 1. Each contour generates a value or a group of values for the contour integral.
  7. If desired, toggle on Step for residual stress initialization values, and select the step from which Abaqus will read the stress data in the last available increment and use the data to calculate the residual stresses. If you select the initial step, the residual stresses are defined by the specified initial conditions. You cannot select a step that occurs after the step in which the history output request is created. For more information, see Including the Effect of a Residual Stress Field on J-Integral Evaluation.
  8. Select the type of contour integral calculation to perform. You can select from the following:

    J-integral

    You use the J-integral in rate-independent quasi-static fracture analysis to characterize the energy release associated with crack growth. The J-integral can be related to the stress-intensity factor if the material response is linear. For more information, see J-Integral.

    Ct-integral

    You use the Ct-integral for time-dependent creep behavior, where it characterizes creep crack deformation under certain creep conditions, including transient crack growth. For more information, see Ct-Integral.

    T-stress

    You use the T-stress component to represent a stress parallel to the crack front. For more information, see T-Stress.

    Stress intensity factors

    You use the stress intensity factors KI, KI⁢I, and KI⁢I⁢I in linear elastic fracture mechanics to characterize the local crack-tip stress and displacement fields. For more information, see Stress Intensity Factors.

    If you request a contour integral calculation using stress intensity factors, Abaqus also computes the crack propagation direction at initiation. You must choose one of the following to indicate the crack initiation criteria:

    • Maximum tangential stress

    • Maximum energy release rate

    • KII=0

    For more information, see Crack Propagation Direction.

  9. Click OK to configure the contour integral analysis and to close the editor.

    For examples of how Abaqus names history output variables in the output database for each contour integral that it calculates, see Contour integral output.