- Locate the mesh display options.
From the main menu bar, select or . In the dialog box that appears, click the Mesh tab. - Toggle Show native mesh to display or suppress the native mesh.
When Show native mesh is on, you can also control the following options:
- Select one or both of the following options to display geometry with the native mesh:
-
Toggle on Show bottom-up geometry to display the geometry of regions that have been assigned the bottom-up meshing technique. This option is on by default.
-
Toggle on Show non-bottom-up geometry to display the geometry of regions assigned all other meshing techniques. This option is off by default.
- Select one of the following options to control the modules in which you can display the native mesh:
-
Choose In the Mesh module only to display your native mesh only in the Mesh module.
-
Choose In all part-related modules from the Part Display Options dialog box or In all assembly-related modules from the Assembly Display Options dialog box to display your native mesh in all modules that support the display of the part or assembly, respectively.
- Toggle Show node labels and Show element labels to affect the display of these items.
- Click OK to implement your changes and to close the dialog box.
Your changes are saved for the duration of the session.
|