Using the boundary condition editors

This section explains how to define specific types of boundary conditions.

The following topic is covered in Modeling techniques:

• Creating the submodel boundary condition

• Defining a symmetry/antisymmetry/encastre boundary condition
• Defining a displacement/rotation boundary condition
• Defining a velocity/angular velocity boundary condition
• Defining an acceleration/angular acceleration boundary condition
• Defining a connector displacement boundary condition
• Defining a connector velocity boundary condition
• Defining a connector acceleration boundary condition
• Defining a base motion boundary condition
• Defining a secondary base motion boundary condition
• Defining a retained nodal DOFs boundary condition
• Specifying temperature
• Defining a pore pressure boundary condition
• Defining a fluid cavity pressure boundary condition
• Defining an electric potential boundary condition
• Defining a magnetic vector potential boundary condition
• Defining a normalized concentration boundary condition
• Defining an acoustic pressure boundary condition
• Defining a connector material flow boundary condition
• Defining an Eulerian boundary condition
• Defining an Eulerian mesh motion boundary condition