Defining cavity radiation symmetry

Using symmetry reduces the computational size of your cavity model. The available symmetries and combinations vary according to the model type. The table in Combining Symmetries, indicates the available symmetry combinations. You can use the following symmetry types to complete the cavity definition:

See Also
Interaction editors
Defining a cavity radiation interaction property
In Other Guides
Cavity Radiation in Abaqus/Standard
Reflection

Select a Number of reflection symmetries, and select a reference z-symmetry value (axisymmetric models), a symmetry axis (two-dimensional models), or a symmetry plane (three-dimensional models) for each reflection.

Abaqus/CAE adds the reflected surfaces to the cavity definition and reduces the remaining number of symmetries allowed in the model. Toggle on Highlight to view the current parameter selections in the viewport.

Periodic

Select a Number of periodic symmetries and number of repetitions for each periodic symmetry. For axisymmetric models, select a reference z-symmetry value and a periodic z-distance value. For two-dimensional and three-dimensional models, select a symmetry axis and a distance vector or a symmetry plane and a distance vector, respectively, for each periodic symmetry.

Abaqus/CAE adds the periodic surfaces to the cavity surfaces you selected for the Properties options and reduces the remaining number of symmetries allowed in the model. Toggle on Highlight to view the current parameter selections in the viewport.

Cyclic

Toggle on Use cyclic symmetric and select the total number of sectors. Select the symmetry point and a point on the axis of symmetry (two-dimensional models) or the first and second points on the axis of symmetry and a point on the symmetry plane (three-dimensional models).

Cyclic symmetry creates new sectors by rotating the original geometry clockwise about the axis of symmetry. Cyclic symmetry is not available for axisymmetric models.

The following conditions must be met:

  • For two-dimensional models the selected point on the axis of symmetry must be on the clockwise side of the geometry defining the original sector.

  • For three-dimensional models the selected point on the symmetry plane must be on the counterclockwise side of the geometry defining the original sector.

  • The total number of sectors must define a complete circle (360°). If you change the number of sectors, you must redefine the geometry to represent the correct portion of the model.

For more information on cyclic symmetry, including figures showing the sector definitions, see Cyclic Symmetry.

Warning:

Abaqus/CAE does not check that the defined symmetries produce a physically realistic cavity model.