ABQ_EChemPET_Electrode_Particles

This parameter table type is used in modeling the electrochemical process in a battery to specify a unique particle name and additional particle information.

This page discusses:

See Also
Coupled Thermal-Electrochemical Analysis

Products Abaqus/Standard

You must include a parameter table of type "ABQ_EChemPET_Electrode_Particles" in the material definition to specify a particle name and additional particle information. The particle name must be unique and is used in the labels of subsequent particle-specific material definitions. If you have multiple particles in a region, you can repeat the parameter table data lines.

Parameter Table Type Definition

PARAMETER TABLE TYPE, NAME="ABQ_EChemPET_Electrode_Particles", PARAMETERS=5
 STRING, " " , "Particle Name", ,  ,
 FLOAT, , "
						
							R
							P
						
					", , ,
 FLOAT, , "
						
							ε
							sParticle
						
					", , ,
 FLOAT, , "
						
							
								
									C
								
								
									s
									,
									 
									P
									,
									_Init
								
							
						
					", , ,
 STRING, "  " , "Formulation Type", , "Formulation_Concentration",

Parameters

Particle Name
Unique name to identify the microscale particle.
R P
Outer radius of the solid microscale particle.
ε sParticle
Volume fraction of the microscale particle with respect to the solid volume fraction of the electrode. Set to 1.0 if only one particle is present.
C s ,   P , _Init
Initial concentration of lithium in the microscale particle.
Formulation Type
Set to "Formulation_Concentration".