ABQ_EChemPET_Electrode_Particle_LPL

This parameter table type is used in modeling one of the aging mechanisms, namely, lithium plating in a battery.

This page discusses:

See Also
Modeling Aging in Batteries

Products Abaqus/Standard

Optionally, you can include a parameter table of type "ABQ_EChemPET_Electrode_Particle_LPL" in the material definition to specify some of the parameters used in the lithium plating computation. This also triggers the computation of the lithium plating aging mechanism in the battery simulation. You can define only one set of data.

Parameter Table Type Definition

PARAMETER TABLE TYPE, NAME="ABQ_EChemPET_Electrode_Particle_LPL", PARAMETERS=4
 FLOAT, 0.0, "
						
							
								
									α
								
								
									c
									,
									L
									P
									L
								
							
						
					", , ,
 FLOAT, 0.0, "
						
							
								
									C
								
								
									L
									P
									L
								
								
									0
								
							
						
					", , ,  
 FLOAT, 0.0, "
						
							
								
									ρ
								
								
									L
									P
									L
								
							
						
					", , ,
 FLOAT, 0.0, "
						
							
								
									M
								
								
									L
									P
									L
								
							
						
					", , ,

Parameters

α c , L P L
Cathodic transfer coefficient for lithium plating.

Default value is zero.

C L P L 0
Initial plated lithium concentration.

Default value is zero.

ρ L P L
Molar density of plated lithium.

Default value is zero.

M L P L
Molar weight of plated lithium.

Default value is zero.