The following commands are available:
deletestation-
Removes a shutdown station from the list of stations.
name:<station_name>-
Specify the name of the station that will be deleted.
restartstation-
Stops and restarts and running station. You cannot start
a station that was stopped using the stopstation command.
name:<station_name>-
Specify the station that will be restarted.
name:*-
Restart all stations.
Note:
There are restrictions and limitations for using this command. For more
information, refer to the SIMULIA Execution Engine Installation and Configuration Guide.
stationstatus (or status)-
Displays status information about stations.
station:<name>-
Display information for one or more stations. If the name is omitted,
all stations are listed.
activeonly:<yes|no>-
Specify whether or not only active stations will be shown.
If no arguments are given, all stations connected to the SIMULIA Execution Engine
are listed.
stopstation-
Shuts down the specified station. You cannot start a stopped station from fipercmd.
name:<station_name>-
Specify the station that will be stopped.
name:*-
Stop all stations.