JMS Configuration - Configuring Service Integration Bus

You need to create the Service Integration Bus and configure SIMULIA Execution Engine-specific options.

  1. On the left side of the console, click Service integration.

    Additional options appear.

  2. Click Buses.

    The Buses screen appears.

  3. On the right side of the console, click New.
  4. In the Enter the name for your new bus text box, type the following entry:

    Fiper Bus

  5. Verify that the Bus security check box is cleared (unchecked).
  6. Click Next.
  7. Review the confirmation screen.
  8. Click Finish.
  9. On the right side of the console, click Fiper Bus in the Name column.
  10. In the Default messaging engine high message threshold text box, type the following entry:

    200000

  11. Click Apply.
  12. In the Topology area on the right side of the console, click Bus members.
  13. Click Add.
  14. Choose the appropriate server from the Server list, if necessary.
  15. Click Next.
  16. Verify that File store is selected.
  17. Click Next.

    The Step 1.2 options appear.

  18. Perform the following for the Step 1.2 options:
    1. In the Log size text box, type 500.
    2. Verify that Default log directory path is selected.
    3. Verify that Same settings for permanent and temporary stores is selected.
    4. In the Minimum permanent store size text box, type 500.
    5. Click Unlimited permanent store size.
    6. Verify that Default permanent store directory path is selected.
  19. Click Next.

    The Step 1.3 options appear.

  20. Click Next.
  21. Review the summary.
  22. Click Finish.
  23. Near the top of the right side of the console, click Save to save the configuration.