lmdiag

lmdiag [-c license_file_list] [-n] [feature[:keyword=value]]

-c license_file_list

Diagnose the specified files.

-n

Run in non-interactive mode; lmdiag will not prompt for any input in this mode. In this mode extended connection diagnostics (see below) are not available.

feature

Diagnose this feature only.

keyword=value

If a license file contains multiple lines for a particular feature, you can select a particular line for lmdiag to report on. For example,

lmdiag f1:HOSTID=12345678

attempts a checkout on the line with the hostid “12345678.” keyword can be one of the following:

• VERSION

• HOSTID

• EXPDATE

• KEY

• VENDOR_STRING

• ISSUER

If no feature is specified, lmdiag operates on all features in the license files in your list. lmdiag first prints information about the license, then attempts to check out each license. If the checkout succeeds, lmdiag indicates this. If the checkout fails, lmdiag gives you the reason for the failure. If the checkout fails because lmdiag cannot connect to the license server, you have the option of running “extended connection diagnostics.”

These extended diagnostics attempt to connect to each TCP/IP port on the license server machine and detect if the port number in the license file is incorrect. lmdiag indicates each TCP/IP port number that is listening. If it is an lmgrd process, lmdiag indicates this as well. If lmdiag finds the vendor daemon for the feature being tested, it indicates the correct port number for the license file to correct the problem.

See The FLEXnet Licensing End User Guide Version 11.6 for more information. This guide is available for download from the Licensing section of the Support page at www.3ds.com/simulia.

1. From the Start menu, select ProgramsAbaqus LicensingLicensing utilities.

2. Verify that Configuration using Services is enabled on the Service/License File tabbed page, and select the Server Diags tab.

3. Click Perform Diagnostics.