*Preprint,model=yes
*Assembly,name=ASSEMBLY-1
*Instance,instance=PART-1-1
*Import,update=no,state=yes,step=2,int=1
** AX, CAR, SLT, ROT, CAR-ROT, SLT-ALN
**
*end instance
**
*******************************************
** put mass and rotary inertia at top nodes
*******************************************
*ELEMENT, TYPE=MASS, ELSET=MASS
1011,PART-1-1.1303
1012,PART-1-1.1305
1013,PART-1-1.1307
1021,PART-1-1.1503
1031,PART-1-1.1703
1032,PART-1-1.1705
*MASS, ELSET=MASS
12.0
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2011,PART-1-1.1303
2012,PART-1-1.1305
2013,PART-1-1.1307
2021,PART-1-1.1503
2031,PART-1-1.1703
2032,PART-1-1.1705
*ROTARY INERTIA, ELSET=ROTI
120.0, 120.0, 120.0
*end assembly
**************************************************
*BOUNDARY
ASSEMBLY-1.PART-1-1.fixed,1,6
*BOUNDARY
ASSEMBLY-1.PART-1-1.TOP, 3,5
*AMPLITUDE, NAME=COSINE, DEF=PERIODIC,time=total time
 1, 2.0, 0.0, 0.0
 1.0, 0.0
*Step
*Dynamic,Explicit,direct user control
 0.0075, 1.25
*CONNECTOR LOAD, AMP=COSINE
ASSEMBLY-1.PART-1-1.CONN1,1, 4.8
ASSEMBLY-1.PART-1-1.CONN2,2, 4.8
ASSEMBLY-1.PART-1-1.CONN6,6, 48.0
***Output,field,time interval=0.075,variable=preselect
*OUTPUT,HISTORY,time interval=0.5
***NODE OUTPUT, NSET=ASSEMBLY-1.PART-1-1.TOP
** U,V,A
*Element output,elset=ASSEMBLY-1.PART-1-1.qa_test
CP,CU,CV,CA,CCU,CTF,CVF,CEF,CUE
*End step