*HEADING
CONN_STD_FORCE_3D: forced, steady-state oscillation  [CONN3D2]
Steady-state damped motion:
u(t) = p_0/(2 xi k) sin(Omega*t) = 0.48 sin(2t)
u(0) = 0.0, v(0) = p_0 Omega/(2 xi k)
f(t) = p_0 cos(Omega*t)
Omega = w_n         = 2.0
xi    = c/(2 m w_n) = 5/48
p_0   = k/10
*************************************************
** create a rigid base for the connector elements
*************************************************
*part, name=PART-1
*NODE,NSET=PLATE
101,  0.,  0., 1.
112,  0., 11., 1.
312,  2., 11., 1.
314,  2., 13., 1.
514,  4., 13., 1.
518,  4., 17., 1.
718,  6., 17., 1.
701,  6.,  0., 1.
*NGEN,NSET=E1
101,112,1
*NGEN,NSET=E2
112,312,100
*NGEN,NSET=E3
312,314,1
*NGEN,NSET=E4
314,514,100
*NGEN,NSET=E5
514,518,1
*NGEN,NSET=E6
518,718,100
*NGEN,NSET=E7
701,718,1
*NGEN,NSET=E8
101,701,100
*NGEN,NSET=INTERIOR
201,212,1
301,314,1
401,414,1
501,518,1
601,618,1
*************************************************
*NODE,NSET=TOP
1303,  2., 2., 2.
1311,  2.,10., 2.
1503,  4., 2., 2.
1513,  4.,12., 2.
1703,  6., 2., 2.
1717,  6.,16., 2.
*NGEN,NSET=TOP
1303,1311,2
1503,1513,2
1703,1717,2
********************************
** define the connector elements
********************************
*ELEMENT, TYPE=CONN3D2, ELSET=AX
11, 202, 1303
*ELEMENT, TYPE=CONN3D2, ELSET=CAR
12, 204, 1305
*NODE
10305,1,4,2
*ELEMENT, TYPE=CONN3D2, ELSET=PROJCAR
1201, 104, 10305
*NODE
** Special definition of node 1307 for radial-thrust
** so that the radial direction is properly defined
** 1307 = (2,6,2) + (0,-1,1)/sqrt(2)
1307, 2.0, 5.29289322, 2.70710678
*ELEMENT, TYPE=CONN3D2, ELSET=RTH
13, 206, 1307
*ELEMENT, TYPE=CONN3D2, ELSET=SLP
14, 208, 1309
*ELEMENT, TYPE=CONN3D2, ELSET=SLT
15, 210, 1311
*ELEMENT, TYPE=CONN3D2, ELSET=CDN
21, 402, 1503
*ELEMENT, TYPE=CONN3D2, ELSET=EUL
22, 404, 1505
*ELEMENT, TYPE=CONN3D2, ELSET=FLT
23, 406, 1507
*NODE
10507,5,6,2
*ELEMENT, TYPE=CONN3D2, ELSET=PROJFLT
1223, 506, 10507
*ELEMENT, TYPE=CONN3D2, ELSET=REV
24, 408, 1509
*ELEMENT, TYPE=CONN3D2, ELSET=ROT
25, 410, 1511
*ELEMENT, TYPE=CONN3D2, ELSET=UNI
26, 412, 1513
*ELEMENT, TYPE=CONN3D2, ELSET=AX-EUL
31, 602, 1703
*ELEMENT, TYPE=CONN3D2, ELSET=CAR-CDN
32, 604, 1705
*ELEMENT, TYPE=CONN3D2, ELSET=CAR-ROT
33, 606, 1707
*ELEMENT, TYPE=CONN3D2, ELSET=JN-FLT
34, 608, 1709
*NODE
** define a special node for link so that bc's can
** be defined to keep the node from moving
1711, 5., 9., 2.
*ELEMENT, TYPE=CONN3D2, ELSET=LNK-UNI
35, 610, 1711
*NODE
** Special definition of node 1713 for radial-thrust
** so that the radial direction is properly defined
** 1713 = (6,12,2) + (0,-1,1)/sqrt(2)
1713, 6.0, 11.29289322, 2.70710678
*ELEMENT, TYPE=CONN3D2, ELSET=RTH-CV
36, 612, 1713
*ELEMENT, TYPE=CONN3D2, ELSET=SLP-REV
37, 614, 1715
*ELEMENT, TYPE=CONN3D2, ELSET=SLT-ALN
38, 617, 1717
*ORIENTATION, NAME=GLOBAL
** Global directions
1.,0.,0., 0.,1.,0.
*ORIENTATION, NAME=LDIRECTION
** orientation used by most connectors
1.,1.,1., 0.001,-1.,1.
*ORIENTATION, NAME=LDIRECTION_PERT
** orientation used by most connectors
1.,1.,1., 0.,-1.,1.
*ORIENTATION, NAME=ORI_RAD-THRUST
** 1-2-3 for radial-thrust is 2-3-1 for others.
0.,-1.,1., 2.,-1.,-1.
*ORIENTATION, NAME=ORI_UNI
** 1-2-3 for universal is 2-1-(-3) for others.
0.,-1.,1., 1.,1.,1.
*ORIENTATION, NAME=L45
1.,0.,0., 0.,1.,1.
*****
*CONNECTOR SECTION, ELSET=AX, BEHAVIOR=CB_AX
AXIAL,
*****
*CONNECTOR SECTION, ELSET=CAR, BEHAVIOR=CB_CAR
CARTESIAN,
LDIRECTION,
*CONNECTOR SECTION, ELSET=PROJCAR, BEHAVIOR=CB_CAR
PROJECTION CARTESIAN,
LDIRECTION,LDIRECTION_PERT
*****
*CONNECTOR SECTION, ELSET=RTH, BEHAVIOR=CB_RTH
RADIAL-THRUST,
ORI_RAD-THRUST,
*****
*CONNECTOR SECTION, ELSET=SLP, BEHAVIOR=CB_SLP
SLIDE-PLANE,
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=SLT, BEHAVIOR=CB_SLT
SLOT,
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=CDN, BEHAVIOR=CB_CDN
** Make CARDAN behave like UNIVERSAL
CARDAN,
ORI_UNI,
*****
*CONNECTOR SECTION, ELSET=EUL, BEHAVIOR=CB_EUL
EULER,
GLOBAL,L45
*****
*CONNECTOR SECTION, ELSET=FLT, BEHAVIOR=CB_FLT
FLEXION-TORSION,
GLOBAL,L45
*CONNECTOR SECTION, ELSET=PROJFLT, BEHAVIOR=CB_PROJFLT
PROJECTION FLEXION-TORSION,
LDIRECTION,LDIRECTION_PERT
*****
*CONNECTOR SECTION, ELSET=REV, BEHAVIOR=CB_REV
REVOLUTE,
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=ROT, BEHAVIOR=CB_ROT
ROTATION,
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=UNI, BEHAVIOR=CB_UNI
UNIVERSAL,
ORI_UNI,
*****
*CONNECTOR SECTION, ELSET=AX-EUL, BEHAVIOR=CB_AX-EUL
EULER, AXIAL
GLOBAL, L45
*****
*CONNECTOR SECTION, ELSET=CAR-CDN, BEHAVIOR=CB_CAR-CDN
CARTESIAN,CARDAN
ORI_UNI,
*****
*CONNECTOR SECTION, ELSET=CAR-ROT, BEHAVIOR=CB_CAR-ROT
CARTESIAN,ROTATION
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=JN-FLT, BEHAVIOR=CB_FLT
JOIN, FLEXION-TORSION
GLOBAL,L45
*****
*CONNECTOR SECTION, ELSET=LNK-UNI, BEHAVIOR=CB_LNK-UNI
LINK,UNIVERSAL
ORI_UNI,
*****
*CONNECTOR SECTION, ELSET=RTH-CV, BEHAVIOR=CB_RTH
RADIAL-THRUST,CONSTANT VELOCITY
ORI_RAD-THRUST,
*****
*CONNECTOR SECTION, ELSET=SLP-REV, BEHAVIOR=CB_SLP-REV
SLIDE-PLANE,REVOLUTE
LDIRECTION,
*****
*CONNECTOR SECTION, ELSET=SLT-ALN, BEHAVIOR=CB_SLT-ALN
SLOT,ALIGN
LDIRECTION,
********************************************
** Define elsets for elements with available
** components in the directions indicated:
********************************************
*ELSET,ELSET=CONN1
AX, CAR, PROJCAR, RTH, SLT
AX-EUL, CAR-CDN, CAR-ROT, RTH-CV, SLT-ALN
*ELSET,ELSET=CONN2
CAR, PROJCAR, SLP
CAR-CDN, CAR-ROT, SLP-REV
*ELSET,ELSET=CONN3
CAR, PROJCAR, RTH, SLP
CAR-CDN, CAR-ROT, RTH-CV, SLP-REV
*ELSET,ELSET=CONN4
CDN, EUL, REV, ROT, UNI, PROJFLT
AX-EUL, CAR-CDN, CAR-ROT, LNK-UNI, SLP-REV
*ELSET,ELSET=CONN5
FLT,
JN-FLT,PROJFLT
*ELSET,ELSET=CONN6
CDN, UNI
CAR-CDN,  LNK-UNI,PROJFLT
*ELSET,ELSET=CONNALL
CONN1,CONN2,CONN3,CONN4,CONN5,CONN6
**********************************
*Nset,nset=plate
202,402,602,104,204,404,604,206,406,506,606,208,408,608
210,410,610,412,612,614,617
*****
*NSET,NSET=D100
** initial velocity in local (1,0,0) direction.
** AXIAL, SLOT, AX-EUL, SLT-ALN
1303, 1311, 1703, 1717
*NSET,NSET=D111
** initial velocity in local (1,1,1) direction.
** CARTESIAN, CAR-ROT
1305, 1707, 10305
*NSET,NSET=D101
** initial velocity in RADIAL-THRUST local (1,0,1) direction.
** RADIAL-THRUST, RTH-CV
1307, 1713
*NSET,NSET=D011
** initial velocity in local (0,1,1) direction.
** SLIDE-PLANE, SLP-REV
1309, 1715
*NSET,NSET=DUNI
** initial velocity for ORI_UNI orientation
** CAR-CDN
1705,
*NSET,NSET=R100
** initial angular velocity in local (1,0,0) direction.
** REVOLUTE, SLP-REV
1509, 1715
*NSET,NSET=R101
** UNIVERSAL, CARDAN, CAR-CDN, LNK-UNI
1503, 1513, 1705, 1711
*NSET,NSET=R111
** initial angular velocity in local (1,1,1) direction.
** ROTATION, CAR-ROT
1511, 1707
*NSET,NSET=PROJFLT
10507
*NSET,NSET=REUL
** initial angular velocity in global (0,0,1) direction.
** EULER, AX-EUL
1505, 1703
*NSET,NSET=RFLT
** initial angular velocity in global (0,-1,1) direction.
** FLT, JN-FLT
1507, 1709
************************************
**FIX ROTATION FOR PROJECTION CARTESIAN
*ELSET,ELSET=QA_TEST
CONNALL
*end part
****
*assembly, name=ASSEMBLY-1
*Instance,name=PART-1-1,part=PART-1
*end instance
*******************************************
** put mass and rotary inertia at top nodes
*******************************************
*ELEMENT, TYPE=MASS, ELSET=MASS
1011,PART-1-1.1303
1021,PART-1-1.1503
1031,PART-1-1.1703
*ELEMENT, TYPE=MASS, ELSET=MASS
1012,PART-1-1.1305
1013,PART-1-1.1307
1014,PART-1-1.1309
1015,PART-1-1.1311
*ELEMENT, TYPE=MASS, ELSET=MASS
1022,PART-1-1.1505
1023,PART-1-1.1507
1024,PART-1-1.1509
1025,PART-1-1.1511
1026,PART-1-1.1513
*ELEMENT, TYPE=MASS, ELSET=MASS
1032,PART-1-1.1705
1033,PART-1-1.1707
1034,PART-1-1.1709
1035,PART-1-1.1711
1036,PART-1-1.1713
1037,PART-1-1.1715
1038,PART-1-1.1717
***ELGEN, ELSET=MASS
**1011,5,2,1
**1021,6,2,1
**1031,8,2,1
*ELEMENT, TYPE=MASS, ELSET=MASS
1041,PART-1-1.10305
*MASS, ELSET=MASS
12.0,
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2011,PART-1-1.1303
2021,PART-1-1.1503
2031,PART-1-1.1703
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2012,PART-1-1.1305
2013,PART-1-1.1307
2014,PART-1-1.1309
2015,PART-1-1.1311
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2022,PART-1-1.1505
2023,PART-1-1.1507
2024,PART-1-1.1509
2025,PART-1-1.1511
2026,PART-1-1.1513
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2032,PART-1-1.1705
2033,PART-1-1.1707
2034,PART-1-1.1709
2035,PART-1-1.1711
2036,PART-1-1.1713
2037,PART-1-1.1715
2038,PART-1-1.1717
***ELGEN, ELSET=ROTI
**2011,5,2,1
**2021,6,2,1
**2031,8,2,1
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2041,PART-1-1.10305
*ELEMENT, TYPE=ROTARYI, ELSET=ROTI
2051,PART-1-1.10507
*ROTARY INERTIA, ELSET=ROTI
120.0, 120.0, 120.0
*end assembly
*BOUNDARY
ASSEMBLY-1.PART-1-1.1711,  1,2
ASSEMBLY-1.PART-1-1.plate, 1,6
ASSEMBLY-1.PART-1-1.10305, 4,6
*INITIAL CONDITIONS, TYPE=VELOCITY
** each displacement component has initial velocity 0.96
** in all the available component of relative motion.
ASSEMBLY-1.PART-1-1.D100,1, 0.5542563
ASSEMBLY-1.PART-1-1.D100,2, 0.5542563
ASSEMBLY-1.PART-1-1.D100,3, 0.5542563
**
ASSEMBLY-1.PART-1-1.D111,1, 1.33809298
ASSEMBLY-1.PART-1-1.D111,2,-0.51648461
ASSEMBLY-1.PART-1-1.D111,3, 0.84116041
**
ASSEMBLY-1.PART-1-1.D101,1, 0.5542563
ASSEMBLY-1.PART-1-1.D101,2,-0.12456625
ASSEMBLY-1.PART-1-1.D101,3, 1.23307877
**
ASSEMBLY-1.PART-1-1.D011,1, 0.78383672
ASSEMBLY-1.PART-1-1.D011,2,-1.07074087
ASSEMBLY-1.PART-1-1.D011,3, 0.28690415
**
ASSEMBLY-1.PART-1-1.DUNI,1,-0.22958046
ASSEMBLY-1.PART-1-1.DUNI,2, 0.26735211
ASSEMBLY-1.PART-1-1.DUNI,3, 1.62499713
**
ASSEMBLY-1.PART-1-1.R100,4, 0.5542563
ASSEMBLY-1.PART-1-1.R100,5, 0.5542563
ASSEMBLY-1.PART-1-1.R100,6, 0.5542563
**
ASSEMBLY-1.PART-1-1.PROJFLT,4, 1.33809298
ASSEMBLY-1.PART-1-1.PROJFLT,5,-0.51648461
ASSEMBLY-1.PART-1-1.PROJFLT,6, 0.84116041
ASSEMBLY-1.PART-1-1.R111,4, 0.5542563
ASSEMBLY-1.PART-1-1.R111,5, 0.5542563
ASSEMBLY-1.PART-1-1.R111,6, 0.5542563
**
ASSEMBLY-1.PART-1-1.R101,4, -0.7838367176
ASSEMBLY-1.PART-1-1.R101,5, -0.2869041514
ASSEMBLY-1.PART-1-1.R101,6,  1.070740869
**
ASSEMBLY-1.PART-1-1.REUL,4, 0.0
ASSEMBLY-1.PART-1-1.REUL,5, 0.0
ASSEMBLY-1.PART-1-1.REUL,6, 0.96
**
ASSEMBLY-1.PART-1-1.RFLT,4, 0.0
ASSEMBLY-1.PART-1-1.RFLT,5,-0.67882251
ASSEMBLY-1.PART-1-1.RFLT,6, 0.67882251
*CONNECTOR BEHAVIOR, NAME=CB_AX
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR BEHAVIOR, NAME=CB_CAR
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR ELASTICITY, COMPONENT=2
48.0,
*CONNECTOR DAMPING, COMPONENT=2
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR BEHAVIOR, NAME=CB_RTH
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR BEHAVIOR, NAME=CB_SLP
*CONNECTOR ELASTICITY, COMPONENT=2
48.0,
*CONNECTOR DAMPING, COMPONENT=2
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR BEHAVIOR, NAME=CB_SLT
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR BEHAVIOR, NAME=CB_CDN
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
1.0E6,
*CONNECTOR ELASTICITY, COMPONENT=6
480.0,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_EUL
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
480.E2,
*CONNECTOR DAMPING, COMPONENT=5
50.E2,
*CONNECTOR ELASTICITY, COMPONENT=6
480.E2,
*CONNECTOR DAMPING, COMPONENT=6
50.E2,
*CONNECTOR BEHAVIOR, NAME=CB_FLT
*CONNECTOR ELASTICITY, COMPONENT=4
480.E5,
*CONNECTOR DAMPING, COMPONENT=4
50.E2,
*CONNECTOR ELASTICITY, COMPONENT=5
480.0,
*CONNECTOR DAMPING, COMPONENT=5
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.d5,
*CONNECTOR BEHAVIOR, NAME=CB_PROJFLT
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
480.0,
*CONNECTOR DAMPING, COMPONENT=5
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.0,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_REV
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_ROT
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
480.d5,
*CONNECTOR DAMPING, COMPONENT=5
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.d5,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_UNI
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.0,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_AX-EUL
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
480.E2,
*CONNECTOR DAMPING, COMPONENT=5
50.E2,
*CONNECTOR ELASTICITY, COMPONENT=6
480.E2,
*CONNECTOR DAMPING, COMPONENT=6
50.E2,
*CONNECTOR BEHAVIOR, NAME=CB_CAR-CDN
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR ELASTICITY, COMPONENT=2
48.0,
*CONNECTOR DAMPING, COMPONENT=2
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
1.0E6,
*CONNECTOR ELASTICITY, COMPONENT=6
480.0,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_CAR-ROT
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*CONNECTOR ELASTICITY, COMPONENT=2
48.0,
*CONNECTOR DAMPING, COMPONENT=2
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=5
480.d5,
*CONNECTOR DAMPING, COMPONENT=5
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.d5,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_LNK-UNI
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR ELASTICITY, COMPONENT=6
480.0,
*CONNECTOR DAMPING, COMPONENT=6
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_SLP-REV
*CONNECTOR ELASTICITY, COMPONENT=2
48.0,
*CONNECTOR DAMPING, COMPONENT=2
5.0,
*CONNECTOR ELASTICITY, COMPONENT=3
48.0,
*CONNECTOR DAMPING, COMPONENT=3
5.0,
*CONNECTOR ELASTICITY, COMPONENT=4
480.0,
*CONNECTOR DAMPING, COMPONENT=4
50.0,
*CONNECTOR BEHAVIOR, NAME=CB_SLT-ALN
*CONNECTOR ELASTICITY, COMPONENT=1
48.0,
*CONNECTOR DAMPING, COMPONENT=1
5.0,
*AMPLITUDE, NAME=COSINE, DEF=PERIODIC
1, 2.0, 0.0, 0.0
1.0, 0.0
*STEP, INC=200, NLGEOM, UNSYM=NO
Force steady-state vibration.  Every dof should give the same answer.
*DYNAMIC, ALPHA=0.0, NOHAF, DIRECT
0.075, 8.0
*CONNECTOR LOAD, AMP=COSINE
ASSEMBLY-1.PART-1-1.CONN1,1, 4.8
ASSEMBLY-1.PART-1-1.CONN2,2, 4.8
ASSEMBLY-1.PART-1-1.CONN3,3, 4.8
ASSEMBLY-1.PART-1-1.CONN4,4, 48.0
ASSEMBLY-1.PART-1-1.CONN5,5, 48.0
ASSEMBLY-1.PART-1-1.CONN6,6, 48.0
*OUTPUT,HISTORY, TIME INTERVAL=2.0
*ELEMENT OUTPUT, ELSET=ASSEMBLY-1.PART-1-1.QA_TEST
CP,CU,CV,CA,CCU,CTF,CVF,CEF,CRF,CUE
*NODE OUTPUT, NSET=ASSEMBLY-1.PART-1-1.TOP
U,V,A
*Restart,write,frequency=1
*END STEP