*HEADING Transfer from Explicit to Standard to Explicit - Adding/removing elements and verification for initial conditions - Test for CPE4R element *IMPORT, STEP=1, UPDATE=YES, STATE=YES E3, *NODE, NSET=N4 201,0,0,0 202,2,0,0 203,2,2,0 204,0,2,0 *ELEMENT, TYPE=CPE4R, ELSET=E4 201,201,202,203,204 *SOLID SECTION, ELSET=E4, MATERIAL=MAT *MATERIAL, NAME=MAT *ELASTIC 200.E9, 0.3 *DENSITY 1000., *BOUNDARY 201,1,2 111,1,2 202,2,2 112,2,2 204,1,1 114,1,1 ** This dummy element is added for QA purpose *NODE 7107, -1.000000 , -1.000000 7108, 0.0000000E+00, -1.000000 7109, 1.000000 , -1.000000 7116, -1.000000 , 0.0000000E+00 7117, 0.0000000E+00, 0.0000000E+00 7125, -1.000000 , 1.000000 *ELEMENT,TYPE=CPE6M , elset=dummy 7101,7107,7109,7125,7108,7117,7116 *solid section, elset=dummy, material=mat *INITIAL CONDITIONS, TYPE=VELOCITY SIDE_2,1,0.1 *NSET, NSET=SIDE_3 202, 203 *NSET, NSET=END SIDE_2, SIDE_3 *RESTART,TIMEMARKS=NO,WRITE,NUMBER=2 ** *NSET, NSET=QA_TEST_ALLNODES N4, SIDE_3, END ** *STEP *DYNAMIC, EXPLICIT ,0.01 *BOUNDARY, TYPE=VELOCITY SIDE_3,1,1,20. ***OUTPUT,HISTORY,TIME INTERVAL=0.0 ***NODE OUTPUT,NSET=END **U,V,A ***ELEMENT OUTPUT,ELSET=E3 **S, ***ELEMENT OUTPUT,ELSET=E4 **S, ***ENERGY OUTPUT **ALLKE,ALLSE,ALLWK,ALLIE,ETOTAL *FILE OUTPUT,TIMEMARKS=YES, NUM=4 *NODE FILE U, COORD, *OUTPUT, FIELD, TIMEMARKS=YES, NUMBER INTERVAL=4 *NODE OUTPUT, NSET=QA_TEST_ALLNODES U, COORD, *OUTPUT,FIELD,VARIABLE=PRESELECT *OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=0.0025 *END STEP