*Heading
Verify cutting plane method
verify integrated output 
Element tested : T3D2 Explicit
*pre print,model=yes
**
** PARTS
**  
*Part, name=Part-2
*End Part
**  
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
**  
*Instance, name=Part-2-3, part=Part-2
         38.,           0.,          10.
*Node
      1,           0.,          10.,           0.
      2,           0.,   3.33333325,           0.
      3,           0.,  -3.33333325,           0.
      4,           0.,         -10.,           0.
*Element, type=T3D2,elset=t3d2
1, 1, 2
2, 2, 3
3, 3, 4
*Solid Section, elset=t3d2, material=STEEL
1.,
*End Instance
**  
*Nset, nset=fix, instance=Part-2-3
 4,
*Nset, nset=all, instance=Part-2-3,gen
1, 4,1
*Nset, nset=bou, instance=Part-2-3
 1,
*Elset, elset=truss, instance=Part-2-3, generate
 1,  3,  1
**
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_beam_POS
40,0,0,0,1,0
truss
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_beam_neg
40,0,0,0,-1,0
truss
*SURFACE, TYPE=CUTTING SURFACE, NAME=angle_beam_pos
40,0,0,.1,1,0
truss
*SURFACE, TYPE=CUTTING SURFACE, NAME=angle_beam_neg
40,0,0,-.1,-1,0
truss
*************
*******************
*node
9999, 0., 0., 0. 
9998, 0., 0., 0.  
9997, 0., 0., 0. 
*nset, nset=nref
9999,
*nset, nset=ioref
9998,
*nset, nset=ioref_move
9997,
*orientation, name=rect
1., 0., 0., 0., 1., 0.
3, 0.0
*rigid body, ref node= nref, tie nset=all
*integrated output section, surf=PARALLEL_beam_POS,name=PARALLEL_beam_POS_sec, refnode = ioref
*integrated output section, surf=PARALLEL_beam_neg,name=PARALLEL_beam_neg_sec, orient=rect
*******************
**************
*End Assembly
*Material, name=STEEL
*Elastic
 2.1e+11, 0.3
*density
7800
*initial conditions,type=stress
truss,30000.
*step
*DYNAMIC,exp
,1.
** 
*****************
*AMPLITUDE,NAME=SMOOTH, DEFINITION=SMOOTH STEP
 0.,0.,1.,0.025
*BOUNDARY
nref,1,5
*BOUNDARY,TYPE=DISPLACEMENT,AMPLITUDE=SMOOTH
nref,6,6,62.8318531
*output, history,var=preselect,freq=1
**
*element output,elset=truss
s,
*integrated output, surf=PARALLEL_beam_POS, var=all
*integrated output, surf=PARALLEL_beam_neg, var=all
*integrated output, sec=PARALLEL_beam_POS_sec, var=all
*integrated output, sec=PARALLEL_beam_neg_sec, var=all
*****************
*end step