*Heading
Test of Surface generated by Cutting plane method
verify integrated output (Explicit)
Elements Tested:CPS3
*Part, name=Part-1
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
**  
*Instance, name=Part-1-2, part=Part-1
         22.,           0.,           0.
*Node
      1,         -10.,          10.
      2,         -10.,         -10.
      3,          10.,         -10.
      4,          10.,          10.
      5,         -10.,   3.33333325
      6,         -10.,  -3.33333325
      7,  -3.33333325,         -10.
      8,   3.33333325,         -10.
      9,          10.,  -3.33333325
     10,          10.,   3.33333325
     11,   3.33333325,          10.
     12,  -3.33333325,          10.
     13,           0.,  -4.22650003
     14,    2.5841856,    2.5841856
     15,  -3.73579717,   2.63760972
     16,  -4.62542486,  -3.40534234
     17,   4.62542486,  -3.40534234
*Element, type=CPS3
 1, 13,  7,  8
 2, 15, 12,  5
 3, 16,  7, 13
 4, 16,  2,  7
 5, 17, 10, 14
 6, 17,  3,  9
 7, 17, 14, 13
 8, 11, 10,  4
 9, 15, 14, 12
10, 12,  1,  5
11, 16, 15,  5
12, 17,  8,  3
13, 14, 10, 11
14, 14, 11, 12
15, 16,  5,  6
16, 15, 13, 14
17, 16,  6,  2
18, 16, 13, 15
19, 17, 13,  8
20, 17,  9, 10
** Region: (Section-1:Picked)
*Elset, elset=_PickedSet2, internal, generate
  1,  20,   1
** Section: Section-1
*Solid Section, elset=_PickedSet2, material=steel
1.,
*End Instance
**
*Nset, nset=all, instance=Part-1-2, generate
  1,  17,   1
*Elset, elset=all, instance=Part-1-2, generate
  1,  20,   1
*Nset, nset=fix, instance=Part-1-2
 2, 3, 7, 8
*Elset, elset=fix, instance=Part-1-2
  1,  4, 12
*Nset, nset=top, instance=Part-1-2
  1,  4, 11, 12
*Elset, elset=top, instance=Part-1-2
  8, 10, 14
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_solid_POS
0,0,38,0,1,0
all
*SURFACE, TYPE=CUTTING SURFACE, NAME=angle_solid_pos
60,-5,10,0.1,1,0
all
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_solid_neg
0,0,38,0,-1,0
all
*SURFACE, TYPE=CUTTING SURFACE, NAME=angle_solid_neg
60,-5,10,-0.1,-1,0
all
*******************
*node
9999, 0., 0., 0. 
9998, 0., 0., 0.  
9997, 0., 0., 0. 
*nset, nset=nref
9999,
*nset, nset=ioref
9998,
*nset, nset=ioref_move
9997,
*orientation, name=rect
1., 0., 0., 0., 1., 0.
3, 0.0
*rigid body, ref node= nref, tie nset=all
*integrated output section, surf=PARALLEL_solid_POS,name=PARALLEL_solid_POS_sec, refnode = ioref
*integrated output section, surf=angle_solid_pos,name=angle_solid_pos_sec, refnode = ioref_move,position=center
*integrated output section, surf=PARALLEL_solid_neg,name=PARALLEL_solid_neg_sec, orient=rect
*integrated output section, surf=angle_solid_neg,name=angle_solid_neg_sec
*******************
*End Assembly
** 
*INITIAL CONDITIONS,TYPE=STRESS
 all,30000.,60000.,0.,
** MATERIALS
** 
*Material, name=steel
*Elastic
 30e6, 0.33
*density
7800.
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1
*dynamic,explicit
, 1.,
** 
*****************
*AMPLITUDE,NAME=SMOOTH, DEFINITION=SMOOTH STEP
 0.,0.,1.,0.025
*BOUNDARY
nref,1,2
*BOUNDARY,TYPE=DISPLACEMENT,AMPLITUDE=SMOOTH
nref,6,6,62.8318531
*output, history,var=preselect,freq=1
**
*element output,elset=all
s,
*integrated output, surf=PARALLEL_solid_POS, var=all
*integrated output, surf=angle_solid_pos, var=all
*integrated output, surf=PARALLEL_solid_neg, var=all
*integrated output, surf=angle_solid_neg, var=all
*integrated output, sec=PARALLEL_solid_POS_sec, var=all
*integrated output, sec=angle_solid_pos_sec, var=all
*integrated output, sec=PARALLEL_solid_neg_sec, var=all
*integrated output, sec=angle_solid_neg_sec, var=all
*****************
*End Step