*Heading
Test of Surface generated by Cutting plane method
Test integrated output (explicit)
Elements Tested:CPE6M
*Part, name=Part-1
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
**  
*Instance, name=Part-1-5, part=Part-1
         96.,           0.,           0.
*Node
      1,         -10.,          10.
      2,         -10.,         -10.
      3,          10.,         -10.
      4,          10.,          10.
      5,         -10.,   3.33333325
      6,         -10.,  -3.33333325
      7,  -3.33333325,         -10.
      8,   3.33333325,         -10.
      9,          10.,  -3.33333325
     10,          10.,   3.33333325
     11,   3.33333325,          10.
     12,  -3.33333325,          10.
     13,           0.,  -4.22650003
     14,    2.5841856,    2.5841856
     15,  -3.73579717,   2.63760972
     16,  -4.62542486,  -3.40534234
     17,   4.62542486,  -3.40534234
     18,  -1.66666663,  -7.11324978
     19,           0.,         -10.
     20,   1.66666663,  -7.11324978
     21,  -3.53456521,   6.31880474
     22,  -6.66666651,   6.66666651
     23,  -6.86789846,   2.98547149
     24,  -3.97937918,  -6.70267105
     25,  -2.31271243,  -3.81592131
     26,  -7.31271267,  -6.70267105
     27,  -6.66666651,         -10.
     28,   7.31271267, -0.0360045433
     29,    6.2920928,   2.95875931
     30,   3.60480523,  -0.41057837
     31,   7.31271267,  -6.70267105
     32,          10.,  -6.66666651
     33,   7.31271267,   -3.3693378
     34,    1.2920928, -0.821157217
     35,   2.31271243,  -3.81592131
     36,   6.66666651,   6.66666651
     37,          10.,   6.66666651
     38,   6.66666651,          10.
     39, -0.575805783,   2.61089754
     40, -0.374573827,    6.2920928
     41,  -6.66666651,          10.
     42,         -10.,   6.66666651
     43,  -4.18061113,  -0.38386631
     44,  -7.31271267, -0.0360045433
     45,   3.97937918,  -6.70267105
     46,   6.66666651,         -10.
     47,   2.95875931,    6.2920928
     48,           0.,          10.
     49,         -10.,           0.
     50,  -7.31271267,   -3.3693378
     51,  -1.86789858, -0.794445157
     52,         -10.,  -6.66666651
     53,          10.,           0.
*Element, type=CPE6M
 1, 13,  7,  8, 18, 19, 20
 2, 15, 12,  5, 21, 22, 23
 3, 16,  7, 13, 24, 18, 25
 4, 16,  2,  7, 26, 27, 24
 5, 17, 10, 14, 28, 29, 30
 6, 17,  3,  9, 31, 32, 33
 7, 17, 14, 13, 30, 34, 35
 8, 11, 10,  4, 36, 37, 38
 9, 15, 14, 12, 39, 40, 21
10, 12,  1,  5, 41, 42, 22
11, 16, 15,  5, 43, 23, 44
12, 17,  8,  3, 45, 46, 31
13, 14, 10, 11, 29, 36, 47
14, 14, 11, 12, 47, 48, 40
15, 16,  5,  6, 44, 49, 50
16, 15, 13, 14, 51, 34, 39
17, 16,  6,  2, 50, 52, 26
18, 16, 13, 15, 25, 51, 43
19, 17, 13,  8, 35, 20, 45
20, 17,  9, 10, 33, 53, 28
** Region: (Section-1:Picked)
*Elset, elset=_PickedSet2, internal, generate
  1,  20,   1
** Section: Section-1
*Solid Section, elset=_PickedSet2, material=steel
1.,
*End Instance
**  
*Nset, nset=all, instance=Part-1-5, generate
  1,  53,   1
*Elset, elset=all, instance=Part-1-5, generate
  1,  20,   1
*Nset, nset=fix, instance=Part-1-5
  2,  3,  7,  8, 19, 27, 46
*Elset, elset=fix, instance=Part-1-5
  1,  4, 12
*Nset, nset=top, instance=Part-1-5
  1,  4, 11, 12, 38, 41, 48
*Elset, elset=top, instance=Part-1-5
  8, 10, 14
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_solid_POS
0,0,38,0,1,0
all
*SURFACE, TYPE=CUTTING SURFACE, NAME=PARALLEL_solid_neg
0,0,38,0,-1,0
all
*******************
*node
9999, 0., 0., 0. 
9998, 0., 0., 0.  
9997, 0., 0., 0. 
*nset, nset=nref
9999,
*nset, nset=ioref
9998,
*nset, nset=ioref_move
9997,
*orientation, name=rect
1., 0., 0., 0., 1., 0.
3, 0.0
*rigid body, ref node= nref, tie nset=all
*integrated output section, surf=PARALLEL_solid_POS,name=PARALLEL_solid_POS_sec, refnode = ioref
*integrated output section, surf=PARALLEL_solid_neg,name=PARALLEL_solid_neg_sec, orient=rect
*******************
*End Assembly
*initial conditions,type=stress
all, 30000., 60000., 90000.
** 
** MATERIALS
** 
*Material, name=steel
*Elastic
 30e6, 0.33
*density
7800.
*expansion
1e-4
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1
*dynamic, explicit
, 1., 
** 
*****************
*AMPLITUDE,NAME=SMOOTH, DEFINITION=SMOOTH STEP
 0.,0.,1.,0.025
*BOUNDARY
nref,1,2
*BOUNDARY,TYPE=DISPLACEMENT,AMPLITUDE=SMOOTH
nref,6,6,62.8318531
*output, history,var=preselect,freq=1
**
*element output,elset=all
s,
*integrated output, surf=PARALLEL_solid_POS, var=all
*integrated output, surf=PARALLEL_solid_neg, var=all
*integrated output, sec=PARALLEL_solid_POS_sec, var=all
*integrated output, sec=PARALLEL_solid_neg_sec, var=all
*output, field, freq=1
*node output
u, v, a
*element output
s, le
*****************
*End Step