*Heading
Verify integrated output in B32.
*pre print,model=yes
**
** PARTS
**
**  
*Part, name=Part-2
*End Part
**  
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-2-2, part=Part-2
         36.,           0.,          10.
*Node
      1,           0.,          10.,           0.
      2,           0.,   3.33333325,           0.
      3,           0.,  -3.33333325,           0.
      4,           0.,         -10.,           0.
      5,           0.,   6.66666651,           0.
      6,           0.,           0.,           0.
      7,           0.,  -6.66666651,           0.
*Element, type=B32,elset=b32
1, 1, 5, 2
2, 2, 6, 3
3, 3, 7, 4
*Beam Section, elset=b32, material=STEEL, section=CIRC
1.
0.,0.,-1.
*End Instance
**  
*Nset, nset=fix, instance=Part-2-2
 4,
*Nset, nset=all, instance=Part-2-2,gen
 1,7,1
*Nset, nset=bou, instance=Part-2-2
 1,
*Elset, elset=beam, instance=Part-2-2, generate
 1,  3,  1
**
*Elset, elset=beam1, instance=Part-2-2
 1
*Elset, elset=beam2, instance=Part-2-2
 2
*Elset, elset=beam3, instance=Part-2-2
 3
*SURFACE, NAME=PARALLEL_beam_POS
beam1, end1
*SURFACE, NAME=angle_beam_pos
beam2, end1
*SURFACE, NAME=angle_beam_neg
beam3,end1
*******************
*node
9999, 0., 0., 0. 
9998, 0., 0., 0.  
9997, 0., 0., 0. 
*nset, nset=nref
9999,
*nset, nset=ioref
9998,
*nset, nset=ioref_move
9997,
*orientation, name=rect
1., 0., 0., 0., 1., 0.
3, 0.0
*rigid body, ref node= nref, tie nset=all
*integrated output section, surf=PARALLEL_beam_POS,name=PARALLEL_beam_POS_sec, refnode = ioref
*integrated output section, surf=angle_beam_pos,name=angle_beam_pos_sec, refnode = ioref_move,position=center
*integrated output section, surf=angle_beam_neg,name=angle_beam_neg_sec
*******************
**************
*End Assembly
*Material, name=STEEL
*Elastic
 2.1e+11, 0.3
*density
7800
*INITIAL CONDITION, TYPE=STRESS
beam, 30000.0
*step
*DYNAMIC,exp
,1.
*****************
*AMPLITUDE,NAME=SMOOTH, DEFINITION=SMOOTH STEP
 0.,0.,1.,0.025
*BOUNDARY
nref,1,2
*BOUNDARY,TYPE=DISPLACEMENT,AMPLITUDE=SMOOTH
nref,6,6,62.8318531
*output, history,var=preselect,freq=1
**
*element output,elset=beam
s,
*integrated output, surf=PARALLEL_beam_POS, var=all
*integrated output, surf=angle_beam_pos, var=all
*integrated output, surf=angle_beam_neg, var=all
*integrated output, sec=PARALLEL_beam_POS_sec, var=all
*integrated output, sec=angle_beam_pos_sec, var=all
*integrated output, sec=angle_beam_neg_sec, var=all
*****************
*end step