*Heading
Dynamic loading of a circular plate + rotating rigid shaft
** ----------------------------------------------------------------
** Import circular plate: QUARTER_1
**
*import, update=NO, noffset=0, rename, eoffset=0, lib=cplate_xpl
ASSEMBLY_QUARTER_1_CPLATE, ASSEMBLY_QUARTER_1_CPLATE
*importelset, rename
ASSEMBLY_QUARTER_1_EHOUTPUT, ASSEMBLY_QUARTER_1_EHOUTPUT
*importnset, rename
ASSEMBLY_QUARTER_1_CLAMPED, ASSEMBLY_QUARTER_1_CLAMPED
ASSEMBLY_QUARTER_1_CPLATE_NODES, ASSEMBLY_QUARTER_1_CPLATE_NODES
ASSEMBLY_QUARTER_1_X-SYMMETRY, ASSEMBLY_QUARTER_1_X-SYMMETRY
ASSEMBLY_QUARTER_1_Y-SYMMETRY, ASSEMBLY_QUARTER_1_Y-SYMMETRY
ASSEMBLY_QUARTER_1_ZDISP-ONLY, ASSEMBLY_QUARTER_1_ZDISP-ONLY
** ----------------------------------------------------------------
** Import circular plate: QUARTER_2
**
*import, update=NO, noffset=97, rename, eoffset=80, lib=cplate_xpl
ASSEMBLY_QUARTER_1_CPLATE, ASSEMBLY_QUARTER_2_CPLATE
0., 0., 0., 
0., 0., 0., 0., 0., 1., 90., 
*importelset, rename
ASSEMBLY_QUARTER_1_EHOUTPUT, ASSEMBLY_QUARTER_2_EHOUTPUT
*importnset, rename
ASSEMBLY_QUARTER_1_CLAMPED, ASSEMBLY_QUARTER_2_CLAMPED
ASSEMBLY_QUARTER_1_CPLATE_NODES, ASSEMBLY_QUARTER_2_CPLATE_NODES
ASSEMBLY_QUARTER_1_X-SYMMETRY, ASSEMBLY_QUARTER_2_X-SYMMETRY
ASSEMBLY_QUARTER_1_Y-SYMMETRY, ASSEMBLY_QUARTER_2_Y-SYMMETRY
ASSEMBLY_QUARTER_1_ZDISP-ONLY, ASSEMBLY_QUARTER_2_ZDISP-ONLY
** ----------------------------------------------------------------
** Import circular plate: QUARTER_3
**
*import, update=NO, noffset=194, rename, eoffset=160, lib=cplate_xpl
ASSEMBLY_QUARTER_1_CPLATE, ASSEMBLY_QUARTER_3_CPLATE
0., 0., 0., 
0., 0., 0., 0., 0., 1., 180.
*importelset, rename
ASSEMBLY_QUARTER_1_EHOUTPUT, ASSEMBLY_QUARTER_3_EHOUTPUT
*importnset, rename
ASSEMBLY_QUARTER_1_CLAMPED, ASSEMBLY_QUARTER_3_CLAMPED
ASSEMBLY_QUARTER_1_CPLATE_NODES, ASSEMBLY_QUARTER_3_CPLATE_NODES
ASSEMBLY_QUARTER_1_X-SYMMETRY, ASSEMBLY_QUARTER_3_X-SYMMETRY
ASSEMBLY_QUARTER_1_Y-SYMMETRY, ASSEMBLY_QUARTER_3_Y-SYMMETRY
ASSEMBLY_QUARTER_1_ZDISP-ONLY, ASSEMBLY_QUARTER_3_ZDISP-ONLY
** ----------------------------------------------------------------
** Import circular plate: QUARTER_4
**
*import, update=NO, noffset=291, rename, eoffset=240, lib=cplate_xpl
ASSEMBLY_QUARTER_1_CPLATE, ASSEMBLY_QUARTER_4_CPLATE
0., 0., 0., 
0., 0., 0., 0., 0., 1., -90., 
*importelset, rename
ASSEMBLY_QUARTER_1_EHOUTPUT, ASSEMBLY_QUARTER_4_EHOUTPUT
*importnset, rename
ASSEMBLY_QUARTER_1_CLAMPED, ASSEMBLY_QUARTER_4_CLAMPED
ASSEMBLY_QUARTER_1_CPLATE_NODES, ASSEMBLY_QUARTER_4_CPLATE_NODES
ASSEMBLY_QUARTER_1_X-SYMMETRY, ASSEMBLY_QUARTER_4_X-SYMMETRY
ASSEMBLY_QUARTER_1_Y-SYMMETRY, ASSEMBLY_QUARTER_4_Y-SYMMETRY
ASSEMBLY_QUARTER_1_ZDISP-ONLY, ASSEMBLY_QUARTER_4_ZDISP-ONLY
** ----------------------------------------------------------------
** Import rigid shaft
**
*import, update=NO, step=1, lib=rshaft_xpl
 cube_A1, 
 cube_A2, 
 cube_A3, 
 cube_A4
*importnset
 nref_2, 
 nref_3, 
 nref_4, 
** ----------------------------------------------------------------
** Input for circular plate
**
*surface, type=ELEMENT, name=ASSEMBLY_TOP
ASSEMBLY_QUARTER_1_CPLATE, SPOS
ASSEMBLY_QUARTER_2_CPLATE, SPOS
ASSEMBLY_QUARTER_3_CPLATE, SPOS
ASSEMBLY_QUARTER_4_CPLATE, SPOS
*boundary
ASSEMBLY_QUARTER_1_ZDISP-ONLY, 1, 2
ASSEMBLY_QUARTER_1_ZDISP-ONLY, 4, 6
ASSEMBLY_QUARTER_1_Y-SYMMETRY, YSYMM
ASSEMBLY_QUARTER_1_X-SYMMETRY, XSYMM
ASSEMBLY_QUARTER_1_CLAMPED, ENCASTRE
ASSEMBLY_QUARTER_2_ZDISP-ONLY, 1, 2
ASSEMBLY_QUARTER_2_ZDISP-ONLY, 4, 6
ASSEMBLY_QUARTER_2_Y-SYMMETRY, XSYMM
ASSEMBLY_QUARTER_2_X-SYMMETRY, YSYMM
ASSEMBLY_QUARTER_2_CLAMPED, ENCASTRE
ASSEMBLY_QUARTER_3_ZDISP-ONLY, 1, 2
ASSEMBLY_QUARTER_3_ZDISP-ONLY, 4, 6
ASSEMBLY_QUARTER_3_Y-SYMMETRY, YSYMM
ASSEMBLY_QUARTER_3_X-SYMMETRY, XSYMM
ASSEMBLY_QUARTER_3_CLAMPED, ENCASTRE
ASSEMBLY_QUARTER_4_ZDISP-ONLY, 1, 2
ASSEMBLY_QUARTER_4_ZDISP-ONLY, 4, 6
ASSEMBLY_QUARTER_4_Y-SYMMETRY, XSYMM
ASSEMBLY_QUARTER_4_X-SYMMETRY, YSYMM
ASSEMBLY_QUARTER_4_CLAMPED, ENCASTRE
*amplitude, name=STEP2
0., 1., 1., 1.
** ----------------------------------------------------------------
** Input for rigid shaft
**
*Amplitude, name=RAMP2
 0., 1., 0.01, 2., 100., 2.
** ----------------------------------------------------------------
*Step, name=Step-1
*dynamic, explicit, directusercontrol
1.E-6, 1.E-02
**
** ----------------------------------------------------------------
** Loading for circular plate
**
*dsload, amplitude=STEP2
ASSEMBLY_TOP, P, 1.E+07
** ----------------------------------------------------------------
** Input for rigid shaft
**
*boundary, amplitude=RAMP2
 nref_2, 1, 5, 0.
 nref_2, 6, 6, 0.25
 nref_3, 1, 5, 0.
 nref_3, 6, 6, 0.50
 nref_4, 1, 5, 0.
 nref_4, 6, 6, 0.75
** ----------------------------------------------------------------
**
*output, field, numberinterval=2
*nodeoutput
U, 
*elementoutput
S, 
*output, history, frequency=1, op=NEW
*elementoutput, elset=ASSEMBLY_QUARTER_3_EHOUTPUT
MISES, 
*endstep