User subroutine UVARM

You can now use user subroutine UVARM to define user output variables in static linear perturbation procedures.

This functionality is first available in the Abaqus 2022 FD01 (FP.2205) release.

Products Abaqus/Standard

User subroutine UVARM allows you to access material point quantities and use them to define user output variables. This capability was previously available only with general analysis procedures. You can now use it with static perturbation procedures, including analyses with multiple load cases. If multiple load cases are specified in the static perturbation procedure, user subroutine UVARM is called once for each load case. Similar to the behavior with general analysis procedures, material point variables can be accessed from the user subroutine. However, access is limited to only those output variables for which perturbation values are available.

Abaqus Keywords Guide

Abaqus Verification Guide